All-Pro UCA Group Buy - CLOSED

I talked to All-Pro this morning. All but 4 orders have been shipped, and those 4 will be going out this week.

Mike

 

Anyone know if there's torque value for the uniball bolts?
I've installed UCA's before but those ones actually came with instructions. I just need torque specs.

 

It looks like it might be 90ft. lbs but I'm a 1st gen. I don't know what the stock pivot bolt get torqued down to......?

 

Instructions from A/P

 

Thanks. That one is for 1st gens and said 90 ft lbs and the instructions from TC stated 100 ft lbs.

 

I would imagine anywhere w/in that range (90 - 100) would be fine. You can always call John @allpro for verification.

 

It's 100 ft lbs.

Let us know how we can help you!

Tracy
tracy@allprooffroad.com

 

Awesome, thank you.

 

according to my service book the long pivot bolt torques to 87 ft/lbs. my instructions with the uca said 90 but i went to 97. just cause that was a good year

 

My service manual call for "upper suspension arm" torque at 87 ft/lbs.

4. REMOVE UPPER SUSPENSION ARM
Remove the nut, bolt, 2 washers and upper suspension arm.
Torque: 115 N·m (1,200 kgf·cm, 87 ft·lbf)​

The instructions from AP (1st gen) say that the 3/4 x 5" (pivot bolt you are referring too) bolt be torqued at 90 ft/lbs.
At least this is the way that I understand it...

 

Nice I need to order some new 886s too

 

I still haven't received a tracking order.

 

Solid. Getting an alignment tomorrow.

 

These things are beauts. Thanks @allpro

 

Anyone else's top bolt rusting?

 

Not here - then again I live in SoCal. Sorry to hear bud.