Need help in middle of coil job!

putting my new OME 881s and 5100s on the truck right now, got it in but what is the torque spec for the tophat nuts (3) and the bottom bolt?

 

I don't know the answer but could find it with a google search if I knew the year of your truck

 

https://www.tacomaworld.com/threads/need-help-with-torque-specs.441887/

Hope this helps.

 

Thanks man!!!

 

Check again after 250-500 miles.

 

I have to go on a 300 mile round trip later this week, ill check them and my new shackles and leaf packs when i get back!

 

Front Suspension Torque Settings
ABS Speed sensor & Wire Harness >>>>> 71in lbs
Stabilizer Bar Side (2WD) >>>>> 22 ft lb
stabilizer bar lower arm (Hex end to hold it) (both ends of 4WD) >>>>> 66 ft lbs
Stabilizer Bar Bracket (4WD) >>>>> 19 ft lbs
Upper Ball Joint >>>>> 80 ft lbs
Upper Control Arm >>>>> 87 ft lbs
Front/Rear Alignment Shims (2WD) >>>>> 94 ft lbs
2WD Upper Ball Joint (4 bolts) >>>>> 29 ft lbs
Lower Ball Joint Castle Nut >>>>> 103 ft lbs
Lower Ball Joint Mount (4 bolts) >>>>> 59 ft lbs
LCA Cam Bolts >>>>> 96 ft lbs
LCA Spring Bumpers >>>>> 17 ft lbs
Outer Tie Rod End (Castle Nut) >>>>> 67 ft lbs
Strut (Bottom mount) >>>>> 101 ft lbs
Strup Top Hat >>>>> 47 ft lbs

Rear Suspension
Rear Leaf Front Mount >>>>> 116 FT LBS
Rear Leaf Shackle Bolts (x2) >>>>> 67 ft lbs
Shock Absorber (2WD except pre runner) >>>>> 19 ft lbs
Shock (4wd & Pre Runner) >>>>> 53 ft lbs
U-Bolts >>>>> 90 ft lbs