What would it look like

I just ordered the following
2 inch levelling kit
Nitto terra grapplers 265/70/r18
18 Fuel throttles
Does anyone have this setup or something similar so I can get an idea what my truck will look like when I have it back?

 

Like every truck in this thread.

https://www.tacomaworld.com/threads/lifted-on-265s-show-me.366397/

 

You dont like surprises?

 

lol I do but the thing is I really wanted 3 inches but the guy said I could either do a 4inch suspension lift (which was out of my budget) or a 2 inch levelling kit which I'm hoping my truck doesn't sit too low

 

Buy once cry once. It will look good

 

I'll be sure to post some pictures once I get it back!

 

This is mine with a 2" leveling kit. It was about a half in higher in the front. I ended putting an Icon progressive aal in to get a little rake back. My wheels are 17x9 with 255/75-17.

 

Should look pretty close to this

 

Not sure why he said you couldn't do a 3" lift. That's what mine has, along with a 2" in the rear. However, you should be able to get it aligned good with a 2" lift without getting new upper control arms, which are at least 400 bucks, depending on brand (which could be why he told you 2" or 4"). I have the same size tires on mine, although different wheels and tires.

 

bad ass truck

 

Thanks. This is with the aal.

 

Well, I ended up going to a different shop and they did a 3 inch lift here are the pictures.
As you can see the front end sits up higher than an f150 with a leveling kit