1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Spacer + Backspacing Question

Discussion in 'Off-Roading & Trails' started by Lee_533, Dec 27, 2016.

  1. Dec 27, 2016 at 3:46 PM
    #1
    Lee_533

    Lee_533 [OP] Well-Known Member

    Joined:
    Oct 9, 2016
    Member:
    #199331
    Messages:
    217
    Gender:
    Male
    First Name:
    Andrew
    Vehicle:
    2016 Tacoma SR5 4X4
    2.5" Extended Travel King Coilovers, Camburg Uniball UCAs, Total Chaos LCAs, Dakar Leafs, Fox Rear Shocks, warn winch, Full Relentless armor, arb on board air compressor, 35” Tires
    Ok, so I'm wanting to know if running the spidertrax 1.25 spacers with my 4.5" backspaces wheels will blow out my bearings. Even with 4.5" backspacing my tire (285/75/r16) is still very close to the upper control arm. I think I rubbed hard last time out (just from the sound of it) and I've already done the body mount chop. So I bought some spidertrax 1.25 wheel spacers. With this mess anything up? I wheel pretty hard if that needs to be taken in to affect. My front tires are still slightly sucked in compared to the rears.
     

Products Discussed in

To Top