spindles on today more to come

I have a 04 single cab toyota tacoma with balljoint relocation and a 3 inch fabtech spindle and went and test fitted 275/70r18 and manage to fit them and not rub at full lock or rub on my bumper will be picking me up a set of delta chaparral m/t within the next week if yall could give me alittle bit more information on lifting it up just alittle more besides a body lift let me know
Also my rim specs are ar908 18x8 with +40 offset with 6.07 inches backspacing

 

Swapping in V6 coils will supposedly give you about an inch of lift. Coil spacers is another option. You'll get 3/4" of lift out of them but they give a pretty harsh ride.

For the rear, you can either go with an AAL kit or longer shackles. Or if you don't mind shelling out $, swap in a heavier duty leaf pack.

 

So I'm eliminating the bar pin style shocks and putting coil overs on it managing to get around 3 more inches of lift

 

Nice. I know some company (maybe Total Chaos) used to sell some.

 

I'm custom fabricating the bar pin eliminator and going with qa1 coilovers

 

Yeah man it'll be sick I'm using the stock LCA since Downey doesn't make them anymore and they are hard to come by.

 

I should be at 7 inches of lift when I get everything done

 

Yeah I think there's ONE guy on here selling his downey lowers and he has like 5 people interested in them lol

 

Yeah but I'll post pics when I get it done

 

Top of the front fender well is at 35 1/2 inches the back is at 32 1/2 inches

 

So I have enough room to run my cool overs after my ball joint relocate and everything I should be able to push 3 inches out of My coilovers that will be in soon

 

Any updates of the LCA? I'm trying to do the same thing

 

im going to be ripping the lca's some time next month to get them extended 2 inches along with the uca and put the coil overs on it hopefully getting the lca welded with a custom fab piece that will weld in were the hole is in the lca hopefully ill get the measurements to see what i need to do for the shock to keep it in place

 

fitment for the 35's are in!

 

Nice, what setup are you running in the back to level it out?

 

Nothing as of right now