Modified OEM shifter reduced height (9 1/2") Shifter for 2WD including X-Runners

I have been modified worn out shifters on XRU for several years. I have also done them for a few members here.

I buy old shifters and refurbish them. I remove the old worn out internal rubber bushings and replace them with a polyurethane epoxy. This will make the shifter very firm and will far outlast the stock shifter. In this process, I usually cut the height of the shifter down 1 ~ 1 1/2 inches.

Today, I have a shortened OEM shofter (9 1/2") for a 2WD, including X-Runners. This one is approximately 9 1/2" from the bend (Stock is about 11 1/2"). Stock rubber internal bushings have been removed and replaced with a polyurethane epoxy. This will shift much firmer than a stock shifter. This works best when paired with an URD SS.

Price is $120 shipped + your old oem shifter. I ship the shifters with a new white tip bushing.

 

Make these for 4x4 5spd?

 

I have not at this time.

I do have a project coming up that I am going to attempt this. I will keep you informed as it progresses.

 

I'd be first in line for a 8.5in one!

 

Bump.......

 

This has sold.