Taco lean

UPDATE - i messure the ground to fender distance and even with a 3/8" spacer on the drivers side its 1/8" lower than the passeneger side with no spacer. I guess no spacer for the passenger side! No extra work!!


This is probably a stupid question but thought is ask anyway just to get some others opinions. I have taco pean after some 5100 w/ 881s were installed. I put a 3/8" spacer and longer studs on the drivers side since thats what i had on hand. Would it be smarter to get a 1/4" spacer for the passenger side to maintain the extra bit of lift on the drivers side? Not 100% sure what to do. I have another 3/8" spacer on hand right now. The 1/4" will need to be ordered from wheelers.

 

Unless you were on some level as hell ground 1/8" isnt accurately measured with this technique. I would say your pretty well even now as is.

Id leave as is.

 

I am, i messured in my drive way (brand new) and is 100% level. I know its hard to messure that close with a tape messure the way i did but that is about as close as i could get (no way my messurement is dead on lol) . I was suprised by how much lower the drivers side was tho....