SOLD TRD supercharger 3.4L

Bought a TRD supercharger a while back but recently decided against installing as I might sell the tacoma in the near future.

I was told it had 60k on it, comes with what you see.

TRD 7th injector kit, comes with the ECU, ECU controller, and injector/stainless hose. Fits 00-01 tacoma 99-00 4 runner. asking 400 obo, New it would 950+.


Asking 1600 obo plus shipping for the super charger. Located in Gloucester 23072 VA (eastern Virginia)

 

Hmmmmmmmm

 

Where are you located?

 

Want

 

@YotaGurlIAm

 

Eastern Virginia

 

If it stays till after tax season.

 

i would like to stand in line for the 7th injector if you sell it separately.

Thanks

 

I think its missing a buncha bolts and what not..

 

Yeah missing the tensioner, bracket and bolts, single SC bolt, side attachment spacer and bolt and all the other accessories to install.

For everyone's info, that is the TRD 7th kit, NOT URD.

 

You can always make an offer

 

Okay so it appears it's missing a few bolts and the tensioner. The bolts could easily be found at fastenal or lowes and fab up any of the small pieces some are already attached. Other than ordering a tensioner these are pretty damn minor odds and ends. Attached is a pic of a new set of hardware I found online. I did not realize it used a separate tensioner that's my fault for being a noob. I can work on the price accordingly but don't forget it does include the 7th injector $

 

@SCRunner12 what are the chances of being able to get the missing parts..?

 

I found a thread on here of a guy who made his own kit buying things off the shelf / fabbing some brackets. I'm gonna reach out to him he even spoke about selling such a kit if there is not one readily available online. But if you look in the picture I posted it's all very simple components and the tensioner can be purchased on its own. When I have some down time I'll see what I can put together. It doesn't look to be all too much but I'm no expert.

 

In my experience the hardest part to find is the throttle cable bracket. That may be one of the parts that some people end up fabricating. Most of the rest is bolts to mount the s/c to the motor. Most of the other smaller bolts you reuse from the stock manifold.

Here's a link for a new dynamic tensionor from TRDparts4U.
https://trdparts4u.toyotaofdallas.com/scripts/prodView.asp?idproduct=-8180

 

I have the throttle cable bracket. And I was told many of the bolts are reused which is why I wasn't as concerned when I purchased it lacking additional bolts.

 

Doesn't fit 2.7

 

@m3bassman or @Blackdawg for Igor so u can have two that go slow

 

Looks like throttle cable bracket is still attached, I have an extra used tensionor (you can replace the pulley bearing if it's bad easily) and the bolts are definitely not hard to source. This is a good deal at $1850obo. GLWS

 

No thanks. haha Im about done fucking with these blowers.