*Lets See Your Spindle Lifts*

http://www.4crawler.com/4x4/ForSale/DriveshaftSpacer.shtml
65mm x 65mm
I bought 1.25" but it might actually be a bit to big, should have gone with the 1" one. But it's working, I can always replace it later. I want to do the archive shackle flip so maybe it'll end up being better, who knows. #beacusetruckstuff

 

Bad ass man, thank you!!!!

 

We're all learning as we go, glad I can help!

 

You can say that again!!!

Just want to make sure I have my angles covered lol. Don't really have time to chase around vibrations.

 

The first time I felt vibes I got all worried knowing how much trouble people have had in the past. In the end it was just u-joints, but I tried flipping my carrier bearing like a lot have done with success and it made my vibes 1000 times worse
Since then I've only felt vibes one other time and again u-joints were the culprit.

 

Maxtracs and 2016 TRD OR shock and coils on my '15 SR5

 

• 6.5" Maxtrac Spindle Lift
• 285/70R17 Ridge Grapplers
• MM 970 17x8 | 0mm OS | 4.5" BS