07 Tacoma check engine light

Hello all!

Can anyone help with this. My truck is throwing several check engine lights after installing a reverse camera. The truck is running and driving fine other than cruise control won't set.

 

Have they been reset at all and then come back?

 

Yes I borrowed my friends scanner reset it there and also tried disconnecting battery. Cel goes out then comes back on.

 

Well then I'm of no help! That was going to be my suggestion. Hopefully someone else with more experience can chime in.

 

Thanks anyway!

 

If you don't get much help here, maybe a mod could move it into the appropriate sub-forum. @MTgirl @ForeRunner @sean266

 

Sorry that would be great. I'm definitely a newb.

 

Looks like Sean226 was kind enough to move it! Let's hope it gets some more foot traffic now.

 

Thanks!

 

If it was fine with no faults before you installed the reverse camera.
Installed the reverse camera.
Now getting all kinds of faults.

Undo the reverse camera as something is obviously wrong there. or at least a good place to start.

Check ALL of the fuses with a meter both in the cab behind the change pocket to the left of the steering wheel and under the hood drivers side fuse panels.

I have a feeling something got shorted during the camera installation and blew a fuse or two.

 

Unhooked the camera. And I also checked all fuses. They are all good. I am stumped!