Tire pressure sensor?

I believe I have v10.10.018 and the FCC ID is PAXPMVC015

 

I went from steel to AL wheels. I don't believe there is that button on the 2016 but I remember it on my 2011. I'll have to RTFM.

 

There IS that button on the 16's. I drove about 45 miles on the interstate at 70 mph after my wheel swap, and my sensors never picked up the pressures on the corners. Whatever the dealer did with the ECU brought back the corner pressures.

G.

 

Found it! I followed the earlier instructions on using the reset button but the light stays solid yellow. Currently throwing C2126 code. It will let me set tire positions and writes that to the ECU, but it will not write the sensor IDs.

 

Appears you have the right FCC ID.

There is a newer Techstream software version 10.20.030 available free, that may help with the 2016s:

https://www.toyota-tech.eu/GTS/Wizard/Step5-Software.aspx

 

I believe you will need Toyota Techstream v10.30.029 for 2016 Tacoma vehicle coverage.

 

If I have a different set of wheels with winter tire, no TPMS, does it disable anything... besides not sending the pressure info?

 

Thanks tomwil, I just got that installed on my DT.

mvusa, I'll try that next if 10.20.030 fails to write the sensor IDs. Thank you!

 

I never got any version of Techstream to update my 2016 Tacoma. Discount Tire has an Autel device which can get the job done.

They had this or a TS601:

http://www.ebay.com/itm/Autel-MaxiT...:g:CGUAAOSwpDdVMOTe&item=381091676310&vxp=mtr

 

I tried to download on that link but I get an error page when I click the version number that looks like this:

This XML file does not appear to have any style information associated with it. The document tree is shown below.
<Error>
<Code>NoSuchKey</Code>
<Message>The specified key does not exist.</Message>
<Key>techdoc3/GTS OTHER PC/GTS_10.20.030_TME_NDSI.exe</Key>
<RequestId>E4A74F781317B941</RequestId>
<HostId>
xZtblqHZtfoW/cnC7AjSp0kLu33mG5nFTr3o9pJFq0kDuZqij+XpTgG9/T3q5NU1PFEzcZY0rBw=
</HostId>
</Error>


are others able to download the software from that link or is the site broken right now? I tried it without logging on and got that error and then tried again after registering and got the error again.

 

Right click link, select "save as"

 

No version of TS would update my sensor IDs. Tires Plus did it with their Snap-On unit when we told the handheld it was a 2015 Camry.

My TPS is now 100% functional...

 

Thanks for letting us know, but surprising!

Wonder what version the dealerships are using?

 

I HAVE THE SAME PROBLEM AND USE TECHSTREAM 11.30 ¿ HOW DO YOU SOLVED?

 

What are the disadvantages other than the tire pressure warning light comes on if I don't put any TPMS sensors on the tires/wheels?

I just bought a set of wheels/tires from the Tacoma limited (18" with Michelin tires) and planning to have discount tires swap the sensors to this new set. Then keep the current set of wheels/tires (without sensors) as backup or winter.

Thanks

 

Don't waste your time, money or effort...! Use a 3/4" round piece of black electric tape and cover that dumb-ass light..! Problem solved for less than 1 cent..!