1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Hard wire a dash cam ?

Discussion in '3rd Gen. Tacomas (2016-2023)' started by FiaCobra, Jan 24, 2017.

  1. Jan 24, 2017 at 5:52 PM
    #1
    FiaCobra

    FiaCobra [OP] Well-Known Member

    Joined:
    Jan 5, 2017
    Member:
    #206640
    Messages:
    102
    Gender:
    Male
    I'd like to hard wire in a dash cam on my '17 TRD OR Taco. I'd want it to be powered only when the truck is started. Does anyone know of an easy fused 12v plug around the dash somewhere? I was thinking of looking at the brake controller plug behind the left side of the dash.

    Anyone have ideas where I should look for power ?
     
    shakerhood likes this.
  2. Jan 24, 2017 at 5:57 PM
    #2
    Joe23

    Joe23 Canuckistikian

    Joined:
    Oct 5, 2015
    Member:
    #165909
    Messages:
    11,302
    Gender:
    Male
    The Great White North
    Vehicle:
    2017 TRD Off-road DCSB
    @gpb had a pretty good write up on how to do it.

    I'm cheap and buying a 12V socket to add was $6 at the local auto store, had everything else needed from previous projects.

    So I just added a 12V socket on the drivers side behind the kick panel to the left of the fuse box. and used an ad a fuse there.
    its out of sight and what not and if I want to move it its one little plastic nut I can take off by hand and then pull the little bit of trim off easy and then unplug. wire is ran up the side in the weather stripping and tucked into the edge of the a pilar and head liner. cant see it but easily removed.

    Just added some tape to the socket as it seems it was wiggling loose when hitting bumps as my camera kept turning off. Works fine now and it took me about 5 minutes total to open it up, put the tape and close it back up.
     
  3. Jan 24, 2017 at 6:04 PM
    #3
    Pabloeeto

    Pabloeeto Well-Known Member

    Joined:
    Jun 10, 2014
    Member:
    #131724
    Messages:
    1,025
    Gender:
    Male
    First Name:
    Paul
    San Diego
    Vehicle:
    06 DCSB TRD Sport 4x4
    K&N filter, 3.5 Aux input mod, Fox 2.0 Coilovers, Fox 2.0 Resi Shocks, Element UCAs, Old Man Emu Dakar Leaf pack.
    This site contains affiliate links for which the site may be compensated.
    #3
  4. Jan 24, 2017 at 6:05 PM
    #4
    gpb

    gpb Well-Known Member

    Joined:
    Aug 24, 2016
    Member:
    #195408
    Messages:
    6,069
    Gender:
    Male
    Atlanta
    Vehicle:
    2017 White DCSB TRDOR 4x4
    Look at the AUX Power #1 & #2 fuses in the fuse block under the dash on the driver side. Either should be fine. They are switched with the ignition. You'll need low-profile mini fuse taps.

    See my writeup for my F770 dashcam in my signature for more details and a link to the fuse tap I used.

    (thanks to @Joe23 for tagging me)
     
    Last edited: Jan 24, 2017
  5. Jan 24, 2017 at 6:42 PM
    #5
    FiaCobra

    FiaCobra [OP] Well-Known Member

    Joined:
    Jan 5, 2017
    Member:
    #206640
    Messages:
    102
    Gender:
    Male
    Awesome, thanks fellas. @gpb I'm gonna go your route.
     
    gpb likes this.
  6. Jan 24, 2017 at 6:45 PM
    #6
    DrVonEvilSatan

    DrVonEvilSatan Well-Known Member

    Joined:
    Jan 31, 2016
    Member:
    #176713
    Messages:
    565
    Vehicle:
    Toyota Truck
  7. Jan 24, 2017 at 8:48 PM
    #7
    Sagebrush

    Sagebrush Well-Known Member

    Joined:
    Apr 2, 2016
    Member:
    #183141
    Messages:
    419
    Gender:
    Male
    Vehicle:
    2016 Silver Double Cab Tacoma OR
    Stock plus a topper
  8. Mar 15, 2017 at 7:36 PM
    #8
    USDashCamera

    USDashCamera Put it in H

    Joined:
    Jun 22, 2016
    Member:
    #190311
    Messages:
    640
    Gender:
    Male
    Vehicle:
    2017 Quicksand TRD OR
    worth noting that viofo has released a new g1w dubbed the G1W-S using a sony CMOS sensor that has significantly better night vision. I review it here:


    I compare my G1W-CB to the G1W-S, and its pretty much the same price on Amazon: https://www.amazon.com/VIOFO-G1W-S-Recording-Recorder-Capabilities/dp/B01MUSMZHQ

    You can see my comparison of the G1W-CB on top, G1W-S on bottom:

    comp6.jpg
     
    IronPeak and shakerhood like this.
  9. Mar 23, 2017 at 6:42 PM
    #9
    Lvgmman

    Lvgmman Well-Known Member

    Joined:
    Mar 17, 2017
    Member:
    #213597
    Messages:
    102
    Gender:
    Male
    First Name:
    Thomas
    Vehicle:
    2017 White Tacoma TRD off-road 4x4
    is the s a capacitor model. i have already had a lithium battery version explode during the summer. not doing that again.

    **just read it... very cool. good thing i looked i was minutes from ordering a g1w-cb how did you wire it up. curtain airbags are a concern of mine currently

    @USDashCamera
     
    Last edited: Mar 23, 2017
  10. Mar 23, 2017 at 6:51 PM
    #10
    Lvgmman

    Lvgmman Well-Known Member

    Joined:
    Mar 17, 2017
    Member:
    #213597
    Messages:
    102
    Gender:
    Male
    First Name:
    Thomas
    Vehicle:
    2017 White Tacoma TRD off-road 4x4
    order a G1w-s since I have a g1w-CB and its' been a soldier through 3 las vegas summers now. it actually was more expensive on ebay vs Amazon which is a new thing for me. On top of that it comes with the 3 mounts they normally charge more for on each of on the g1w series. seems like a no brainer the question is i assume it comes with a cig lighter plug in power source not a hardwire kit. does it still use the standard g1w power connector and hardwire kit?
     
    Last edited: Mar 23, 2017
    This site contains affiliate links for which the site may be compensated.
    #10
  11. Mar 23, 2017 at 7:12 PM
    #11
    TripleEight

    TripleEight Well-Known Member

    Joined:
    Jun 29, 2016
    Member:
    #190895
    Messages:
    67
    Gender:
    Male
    Vehicle:
    2016 Tacoma TRD Off Road DCSB Gray
    Like others here have done, I wired my A119 to the 12v from the mirror. I originally had the hardwire kit from spytec but it wasn't working in cold weather so I bought the hardwire from Hitcar and it's working good now. I used a 3amp fuse since I wired it directly from the mirror wiring. Posi tap connectors work great, much more reliable than the old t taps
     
  12. Mar 23, 2017 at 7:15 PM
    #12
    Lvgmman

    Lvgmman Well-Known Member

    Joined:
    Mar 17, 2017
    Member:
    #213597
    Messages:
    102
    Gender:
    Male
    First Name:
    Thomas
    Vehicle:
    2017 White Tacoma TRD off-road 4x4
    sorry I should have been more specific this was in reference to the g1w-s. the g1w series requires 5v normally
     
  13. Mar 23, 2017 at 7:28 PM
    #13
    TripleEight

    TripleEight Well-Known Member

    Joined:
    Jun 29, 2016
    Member:
    #190895
    Messages:
    67
    Gender:
    Male
    Vehicle:
    2016 Tacoma TRD Off Road DCSB Gray
    The A119 also requires 5v. The hardwire kits use an inverter, tap into 12v, it puts out 5v via mini usb connector.
     
  14. Mar 23, 2017 at 7:39 PM
    #14
    Lvgmman

    Lvgmman Well-Known Member

    Joined:
    Mar 17, 2017
    Member:
    #213597
    Messages:
    102
    Gender:
    Male
    First Name:
    Thomas
    Vehicle:
    2017 White Tacoma TRD off-road 4x4
    no way to grab power from the mirror without actually tapping the wire right? I'm superstitious about taping into factory wires probably will run a hardwire up the a-pillar using an Add-a-fuse rather than taping the wires on the mirror. That overhead console just pulls down even with the crawl control, moonroof controls etc all mounted up there?
     
    shakerhood likes this.
  15. Mar 23, 2017 at 7:49 PM
    #15
    Donatodellapi

    Donatodellapi Well-Known Member

    Joined:
    Jan 25, 2017
    Member:
    #208641
    Messages:
    89
    Gender:
    Male
    Buy a fuse tap. Mine is tapped into a fuse and all the wires tucked
     
  16. Mar 23, 2017 at 7:52 PM
    #16
    TripleEight

    TripleEight Well-Known Member

    Joined:
    Jun 29, 2016
    Member:
    #190895
    Messages:
    67
    Gender:
    Male
    Vehicle:
    2016 Tacoma TRD Off Road DCSB Gray
    The only thing I've seen, other than the add-a- fuse, that wouldn't require tapping into the actual wire would be a MirrorTap but I believe that company only makes them for radar detectors, not dashcams. I have a Trd off-road and can confirm the overhead console with crawl control just pulls down. Pull down both rear corners, then the front corners, then you can disconnect the electrical connector.
     
  17. Mar 23, 2017 at 7:58 PM
    #17
    Lvgmman

    Lvgmman Well-Known Member

    Joined:
    Mar 17, 2017
    Member:
    #213597
    Messages:
    102
    Gender:
    Male
    First Name:
    Thomas
    Vehicle:
    2017 White Tacoma TRD off-road 4x4

    I was just looking at those lol, yeah 12vdc cams only. I'm trying to find the connector they use the little probes and get that mini step down above. Is there actually room above the console to leave that stepdown up there? seems like i'm going to end up at a specialty store with a picture of the connectors trying to figure those out. I like the idea of avoid airbags while not cutting into the factory wires. so basically a hybrid solution of both directions people are going. the other issue to be aware of is the MirrorTap has an inline 2A fuse so if I used that quick math would suggest that the little mini stepdown could possibly blow that fuse if it were to actually pull 3A through it at 5v. odds are low of that much draw but i'd rather not pop that fuse and have to replace the entire cable because of it. is the auto-dim mirror on its own fuse? if so anyone know what it's rated at. can't imagine its not on a larger acc fuse somewhere is the 15A range
     
  18. Mar 23, 2017 at 8:08 PM
    #18
    TripleEight

    TripleEight Well-Known Member

    Joined:
    Jun 29, 2016
    Member:
    #190895
    Messages:
    67
    Gender:
    Male
    Vehicle:
    2016 Tacoma TRD Off Road DCSB Gray
    Not sure about the fuse on the auto dimming mirror. To address your other question, yes there is more than enough room above the headliner next to the overhead console for any wiring, inverters, fuses, etc. If you've never seen posi taps, check into them, they are very easily installed and removed and only put a small pinhole in the wiring. If you don't feel comfortable doing that, your hybrid solution sounds like a good idea as long as you can find the right pin things that tap into the connector on the mirror.
     
    Lvgmman[QUOTED] likes this.
  19. Mar 23, 2017 at 8:16 PM
    #19
    Lvgmman

    Lvgmman Well-Known Member

    Joined:
    Mar 17, 2017
    Member:
    #213597
    Messages:
    102
    Gender:
    Male
    First Name:
    Thomas
    Vehicle:
    2017 White Tacoma TRD off-road 4x4
    I looked at them, I am considering using them they are way better than a t-tap that's for sure. that way I won't have a wire running up the mirror to the headliner and down to the camera. it would be a cleaner look. I could also put an in line fuse to the stepdown. the stepdown is the biggest concern since some are known to explode in smoke and flames. which wires (as in color) did you tap. did you grab both the positive and negative or just the positive and ground to something above the console? and what gauge are those wires probably doing the same thing hit car + posi-tap seems like a safe solid solution
     
    Last edited: Mar 23, 2017
  20. Mar 23, 2017 at 8:28 PM
    #20
    TripleEight

    TripleEight Well-Known Member

    Joined:
    Jun 29, 2016
    Member:
    #190895
    Messages:
    67
    Gender:
    Male
    Vehicle:
    2016 Tacoma TRD Off Road DCSB Gray
    It's been a few months, I don't remember what color the wire was, but you can remove the connector from the mirror and use a voltmeter to determine which wire is 12v switched power when you turn the ignition on. I can pull down my console tommorow to confirm the wire color if needed. I grounded to a metal bracket thing that holds the overhead console clip...used a self tapping screw.
     

Products Discussed in

To Top