need help with torque specs.

can anyone tell me what the torque specs for the suspension are for the 1st gen.

i need the specs for

coil spring upper nuts (3 top nuts)
coil spring lower main bolt
rear leaf spring main blots
rear leaf spring U-bolts

 

2000 FSM:


Coil Spring Top Hat - 47 ft lbs
Strut Lower Bolt - 101 ft lbs
Rear Leaf Spring (Front Bolt) - 116 ft lbs
Rear Leaf (Shackle) - 67ft lbs
Rear Leaf U-bolts 90 ft lb

 

thank you sir.

I'm sure this will com in handy for anyone installing a Bilstein 5100 lift or OME lift on their 1st gen taco.

jus for additional information

lower ball joint bolts - 59 ft lbs
lower ball joint castle nut - 105 ft lbs
tie rod end castle nut - 67 ft lbs


please correct me if im wrong this info came of internet searches/videos and not the FSM. if you have a FSM and i gave the wrong info please correct it.

thanks again for the help.

this site is the shizzle.

 

Looks good off the top of my head. I'll check my FSM in the morning before heading to work

 

Been looking for this exactly except for 2nd gen

 

Front Suspension Torque Settings
ABS Speed sensor & Wire Harness >>>>> 71 in lbs
Stabilizer Bar Side (2WD) >>>>> 22 ft lb
stabilizer bar lower arm (Hex end to hold it) (both ends of 4WD) >>>>> 66 ft lbs
Stabilizer Bar Bracket (4WD) >>>>> 19 ft lbs
Upper Ball Joint >>>>> 80 ft lbs
Upper Control Arm >>>>> 87 ft lbs
Front/Rear Alignment Shims (2WD) >>>>> 94 ft lbs
2WD Upper Ball Joint (4 bolts) >>>>> 29 ft lbs
Lower Ball Joint Castle Nut >>>>> 103 ft lbs
Lower Ball Joint Mount (4 bolts) >>>>> 59 ft lbs
LCA Cam Bolts >>>>> 96 ft lbs
LCA Spring Bumpers >>>>> 17 ft lbs
Outer Tie Rod End (Castle Nut) >>>>> 67 ft lbs
Strut (Bottom mount) >>>>> 101 ft lbs
Strup Top Hat >>>>> 47 ft lbs

Rear Suspension
Rear Leaf Front Mount >>>>> 116 FT LBS
Rear Leaf Shackle Bolts (x2) >>>>> 67 ft lbs
Shock Absorber (2WD except pre runner) >>>>> 19 ft lbs
Shock (4wd & Pre Runner) >>>>> 53 ft lbs
U-Bolts >>>>> 90 ft lbs

 

Something like this should really be stickied.

 

I think that pdf has every torque spec for the truck.

 

Epic. Thanks... saved it on my phone

 

DL'ed. I can't memba if this the one I already got from ya? I hate searching for files and shiz on my phone. PIA. But this file is worth it

 

so i sold my 2000 and now have a 2004 can anyone confirm all these torque specs can be used for both different years.

only reason i ask is case i know there are differences between the 98-00 and 01-04 just wondering is all the torque specs stayed the same.

thans again everyone great site great help.

 

Shouldn't be any different as long as you're going from 4x4 / prerunner to 4x4 / prerunner or 5 lug to 5 lug. Torque specs rely mainly on the bolt size and then application. Nothing changed on the suspension parts during that time in terms of major components and how they connect to one another.

 

Dalandser is correct. Should be no difference. I had access to a 2003 FSM at one point and I believe the suspension numbers I put in above are the same as my 2000 FSM.