1st gen upgrades

That''s what I did for my fronts. It works but was a pain to get it right and not recommend it,at least on the 98-00 flares. Had to put it on way outboard and then work it on after I put it back on the truck.

Bought the Bushwacker rubber seal on ebay for like $12 for 10ft or enough to 2 flares. I found some rubber edge seal on ebay that looks like the stuff for $5 shipped for 15ft from China. It''s on a non fast boat so I'll see how it fits when it gets here to redo my rears

 

Jesus, $18 for that rubber piece? That's pretty steep even if you got all 4...

 

https://www.tacomaworld.com/threads/bed-liner-fender-flares.433245/

 

I went with the spray-on. I like the way they came out.

 

They look quite good, how textured are they? No issues with the spray nozzle?

 

The texture is pretty flat, but abrasive. I found staying away about 15" gave a nice, light coat. I did about 4 or 5 passes. Took longer to mask the fender.

No issues with the nozzle. I did have an issue with it spraying just propellent unless I held the can upside-down. It didn't start that way. Maybe I was shaking it too vigorously and damaged the innards.

 

Which kind of paint will keep the smooth stock look but make it black ?

 

Srt4 seats i scored for $100

 

Something i did tonight reverse light