1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

CV axle replacement

Discussion in '4 Cylinder' started by 07Taco2.7, Feb 7, 2017.

  1. Feb 7, 2017 at 11:42 PM
    #1
    07Taco2.7

    07Taco2.7 [OP] Member

    Joined:
    Feb 7, 2017
    Member:
    #209965
    Messages:
    20
    Gender:
    Male
    First Name:
    Chris
    Vehicle:
    07 Tacoma base 4x4 2.7
    My Taco is stock with a camper top on it. The only thing I do is when it comes to replacing a stock part I use the best quality part I can to replace it.
    I just had to replace my front left cv axle on my 07 4x4 taco. It was my first time doing it and didn't have too much trouble. I replaced the oil seal going into the diff but need to replace the seal going into the hub the rubber seal is looking rough. Im having trouble finding the right parts.

    I wanna say there the outer axle hub seal but I am not sure. I need to replace the one that actually goes on the axle that goes into the hub and the one that its butts up to.

    Hope I explained my issue well enough. Thanks in advance guys!
     
  2. Feb 8, 2017 at 2:31 AM
    #2
    07Taco2.7

    07Taco2.7 [OP] Member

    Joined:
    Feb 7, 2017
    Member:
    #209965
    Messages:
    20
    Gender:
    Male
    First Name:
    Chris
    Vehicle:
    07 Tacoma base 4x4 2.7
    My Taco is stock with a camper top on it. The only thing I do is when it comes to replacing a stock part I use the best quality part I can to replace it.
    So I'm pretty sure i figured out what I need I used this website that gives a bunch of detailed pictures with part numbers. http://www.megazip.net
     

Products Discussed in

To Top