What Have You Done To Your 3rd Gen Today?

What's the inlet outlet sizes?

 

Got to work and took a picture of my truck. Lighting was kinda cool

 

Yep, me too. My lease ends in July on my BMW diesel. Going from 50 mpg to 20 mpg. But, I do enjoy the truck. Still enjoying the car on the way to work for now though.

 

Loving my truck so far!

 

Yes.

 

You should have it on the DOT sticker on the driver's side door frame.

 

Looks like I barely made it. 12/16! So this means the tsb is not applicable to me

 

I have 52000 on my tacoma and have a month to go.

 

It took me about 30 minutes to remove the Tacoma and V6 badges. I did it in the garage in about 60 degree weather. My son pointed a hairdryer at the badge while I used dental floss to separate the badges from the warmed adhesive. I broke a lot of floss. Some fishing line would work better. We used our fingernails to remove the bulk of the residual adhesive. The remainder cleaned nicely with Goo Gone. We then gave the truck a nice bath. The Goo Gone directions recommend you wash the area with soap afterward to protect the paint.

 

I'll second @Beemaster's experience. Quick and easy. No drama. Just give it a good wash after you use the goo gone or goof off.

 

Hey, that's me. I broke the shit outta my windshield.

I did finally get it installed correctly.

 

Looks clean and simple. Post pictures once installed.

 

Thanks, was a pain but taped off the top and sides of where the old ones were so the placement was exactly the same, no measurement required..

 

Where can I buy those mud flaps at? Been looking for some with 4wd white letting on them looks good!

 

Made a trip to wheelers to treat my valentine.

 

For leveling here is what I did:
https://www.tacomaworld.com/threads...-3rd-gen-today.399305/page-2197#post-14207237

 

Yes, open tailgate and you will see 4 bolts on each side (10mm) remove bottom one and the next to top one and then pull straight out firmly on tail light housing

 

will get pics up soon but I did the a/c line mod, pop and lock for the tailgate, tri fold bed cover, led lights for the interior, and hid lights, still waiting on the led lights for the fogs to come in.

 

Built myself a bed rack

 

Ahh yes @BEAR_KNIFE_FIGHT and @Lord Humongous were the pioneers of the mirror riser testing. Thank you guys for proving this would work on the 3rd gen.