Review: ImMrYo Rear-View Mirror Lift Bracket

Anybody know if these work on 2013 4Runner?

 

take off your mirror on tacoma, and 4runner, see if they have the same mount. then use tape measure, and measure distance between bracket and headliner

 

#1881 installed.

Quick & easy.

Check is in the mail!

 

Just did this bracket mod on my 2011. Took about 10 minutes. Hardest part was getting the wiring tucked back into the headliner. That piece of tape holding the wiring is tough to tear off, but it needs to be removed so the wiring will tuck. Just be careful pulling down on the headliner so it doesn't tear. Overall, a nice mod and what a difference. Definitely eliminates that front blind spot that the original mirror placement creates. I like that it tucks the mirror right up to the headliner. That will also help shield the sun out of your eyes.

 

Got it, installed it in no time. Like his directions said, move the wiring over to the right of the bracket and things should work fine. Good stuff.

 

I just sent the message to order. Hopefully it gets here before we leave for Baja in two weeks. My son is getting taller in the back seat and the mirror is in his line of sight now.

 

does this work on the gen 3? if not, does anyone know if there is a solution for Gen 3 yet?

 

Bump for Gen 3 options

 

#1887 arrived today and already installed. Very pleased with the quality and finish and at 6'4" the old mirror location was right at eye level for me. Not anymore. Thanks Gerald!

 

Installed #1890 in my regular cab (clip style mirror). Easy as crap. Being 6'4" I needed this. Best mod to date! Thanks Gerald!

 

Product received and installed, $$ sent, thanks. At 5'11" the mirror moving wasn't for me but my son in the back seat. The lift is perfect!

 

@ImMrYo I would like to purchase this for my 2009

 

Another bump for gen 3 options.

 

Yes this will work for 3rd gens. Mine fit just fine.

 

That is really really cool

 

Installed mine the other day, works great! This is on a 2013 with back up camera etc.

 

Do you have any photos/write-up other than "fits just fine"?
I just received mine and trying to get it to work but the bracket seems to be just barely a 1/4" too long.

 

Cut it?

 

I'd rather get some input before I start cutting.

 

Can you tuck it under the headliner?