Cali Raised Light bar and fog light kit

I am new to this site as well as I am new to installing anything on a vehicle. I was wondering how hard it is to wire up the cali raised light bar bumper mount and the fog light replacement pods? Mounting I will be fine with, but the running of the wire and hooking up switch inside the cab have me a little "concerned"... If anyone could help me out and put my mind at ease that would be greatly appreciated to say the least. If this has been covered I do apologize, I searched through and couldnt find anything on "wiring for a rookie"!!!

 

You can buy the fogs with plug and play for the stock wiring and switch. The bar is pretty easy.

 

Thank You! I am going to get the plug and play for the fogs. Is it easy to get the wires into the cab and set the switch up inside for the bar?

 

There's a spot in the firewall next to the brake booster that is pretty easy to get through and it leads right into the drivers side footwear. I recommend getting the stock Toyota size switch to make the fit easier/better

 

Great thanks for your help! Hopefully with the help of a few friends I can figure this all out.

 

if you are looking for a clean switch plate this is a good option. i just bought mine. waiting for it to get here. there are a ton of threads about this as well.

https://www.shapeways.com/product/C...-switch-plate-for-16-tacoma?optionId=59283471

 

Overall, everything is pretty simple, we have YouTube videos of us installing the 30" bar but not the fogs. Also everything comes with instructions!

 

Do you guys sell a cover for the 52" curved?

 

https://caliraisedled.com/collections/accessories/products/magnetic-led-light-cover

Here's he link for them, just make sure to select 50" curved

 

The light bar is pretty easy. I am mechanically challenged and was able to get it done with minimum use of magic words. Good instructions.