3" pro comp nitro lift with 33x12.5x20

I am planning to install a pro comp 3" nitro lift and 33x12.5x20 tires on 20" hardcore rims with a -12 offset will they fit or will i have to trim and if so how and what needs to be trimmed pics please 2015 tacoma base model

 

You will need to trim and do the cab mount chop.
I don't have 20" wheels but had 33" x 12.5" tires on 17" x 9" -12mm offset wheels and took these pictures before and after the cab mount chop. I was running 4" of lift in the front so yours will most likely rub more.

 

Thanks who did your cmc i dont know of any shops that would do it around where i live

 

Where do you live?

 

Converse Louisiana

 

Check with the guys in this thread - https://www.tacomaworld.com/forums/louisiana.129/
That's the Louisiana regional thread. They can get you pointed in the right direction. I'm out in CA and had a local garage mechanic do it for me.

You may need to order these - http://bayareametalfab.3dcartstores.com/CMC-Cab-Mount-Chop-Brackets_p_15.html
That's the cab mount chop plates. Basically someone will cut out the metal from the cab mount location and then weld these plates in further back.

 

Ok could you send me some more pics of your cm i have a brother in law that is a welder that could weld it upwith those

 

Just google Tacoma cab mount chop. Hundreds of different ways to do it

 

Ok thanks