Will a 305/70r16 fit my setup?

Hi guys, thanks for allowing me to join in. I have been an owner of an 05 Tacoma Pre Runner 2x4 extended cab for a while. I have found myself replacing parts on this truck and it is needing tires pretty bad. I've done some modifications by adding a 3" lift and a 2" spacers, I was wondering if a 305/70r16 tires would fit with no cutting? If not, what size tires that I can install to beef up the stance on this truck?

 

265/75/16 without cutting.

 

If you don't want to cut or trim anything you're very limited. Really down to a 265/75-16 as the largest tire.
With a 3" lift in the front and 2" in the rear you can fit larger tires with minimal cutting and trimming, granted 285/75-16 would fit better and require less work than 305s will.
First question, do you have factory wheels or aftermarket? If factory are you going to run spacers or get aftermarket wheels?

 

Thanks a lot, I have factory wheels (16"), would a 285/75r16 give much trouble with a 2" spacers?

 

You'll clear the suspension, so no rubbing there, but you'll rub on the fender and possibly the cab mount as well. 1.25" - 1.5" spacers would be more ideal to minimize the rubbing.

 

Thanks again, that really help. Really glad I joined in and absorbed all the know hows I do not have at the moment, thank you.

 

Anytime I read for the first few years on here before posting much.
In the future google search and add tacomaworld to the end of whatever you're searching for and 9 times out of 10 you'll find the answer.