What you need to know about lifting a 2016 Tacoma - Presented by Toytec Lifts

i didnt do anything special... and it works just fine

 

The coil says it's an 887 but for the Prado. Any concerns for the Taco with variations in part numbers, if any?

 

If you end up replacing the stock Pro parts, contact me I would be interested in buying them from you.

 

I saw what was new then (2013) Taco selling for about 65 000 with a 6 inch lift package complete with bro wheels and lights etc.
Oh and super charger. But still, almost 70 000??

 

There are idiots out there that will pay for it

 

Yes

 

It is the same part. I spoke with ARB on the phone with the same concern. If you cross reference the two PDFS for the Prado and the Tacoma 2016+ it is the same number. If you want to confirm what i'm saying, give them a call or write a message to them via their website. Awesome guys.

 

Ty sir.ordered and on route.

 

What kit do ya'll offer for something similar to this offered by ProComp?

$557 Pro Comp 3" Lift Kit with Front ES6000 Shocks and Rear ES9000 Shocks - K5081B

http://www.4wheelparts.com/Suspensi...1B.aspx?t_c=1&t_s=38&t_pt=3533&t_pn=EXPK5081B

Thanks

 

If anybody was considering an OME BP-51 suspension kit for there 3rd Gen Tacoma Toytec has a cool promo going right now with ARB.

http://toyteclifts.3dcartstores.com...sion-Kit-Lift-Kit-For-2005-Tacoma_p_1609.html

 

FYI - OK4WD is including free SPC upper control arms and free shipping with theirs for the same price.

Link: http://ok4wd.com/shop-by-vendor/old...lift-kit-for-2005-toyota-tacoma-ometac16bp51b

 

Well that's an awesome deal. Not sure how the company can sustain that for very long. They have to be loosing money with each sale. But their loss is your gain.

 

I know - I keep hovering over the add to cart button but I'm wondering what I'm missing here...

 

I looked them up. They are a huge east coast company. Sort of like 4 Wheel Parts. Pretty sure they can write off the arms as promo and still stay in the black. It's a hell of a promo for sure.

 

Free knife for 3k lol count me in.

but it is a sick suspension system for sure

 

Put a set of Eibach Pro-Truck adjustable shocks(E60-82-007-02-10) on the front of My 2017 TRD Sport. Set to highest ring. Added a set of ToyTec leafs to the rear. Then installed Eibach rear shocks(TT55289). I got about 2.5-3 inches of lift. Seem to have a little problem when going over speed bumps. Sounds like the front is expanding down to some stop which must be the shock fully expanding. ToyTec says drop to the next ring. have not tried that yet requires more cost. Also added a MBRP T409 cat back dual exhaust system. Yes it is louder. I just turn my hearing aids off(HAHA) Wife has not ridden in it yet. Just going to put some ear muffs in the console.

 

Are you still running your stock UCA's? could be maxing out the balljoint, which is likely what is happening

 

OME shocks have an internal metal bump stop.. maybe the Eibach's have the same thing. OME clunks over speed bumps also, but only if you're over 5 MPH.

I'd slow down and see if the noise goes away, if it still makes the noise when you're going 2 MPH over a speed bump, then maybe it's something more potentially serious. Remember, you've preloaded the fuck out of the front suspension, it's not going to be completely normal.

 

Yes I have the stock UCA's. And yes if i go a little slower it does not make the sound. I still have the stock shocks. Will look for stops on them tomorrow.

 

Sounds to me like you are bottoming out the shock. Typically that will happen at speed more when the shock has to react quicker vs a slow easy release. Assuming you used the OEM spring which is longer to begin with, you probably need to follow what Toytec told you to do and lower them to the second ring.