Bora Wheel Spacers Group Buy

Morning bump!

 

Orinal post updated with new date for us to call and place orders too!

 

Home from the office bump.

 

Shouldn't have to worry about cutting wheel studs off with these wheels, right? Looks like the factory studs will go right up into the recesses.

I'm running 315/75/16's with 4 1/8" BS. I want 3/4" spacers for two reasons. I'm rubbing my UCA a little. Also, my factory studs really aren't long enough for these after market wheels. Two birds one stone deal.

BUT, my cab mount is already cut as much as it can be without relocating it. If these spacers put my tire into my cab mount, and I've already trimmed the studs... Well then I'm screwed.

 

Does that mean you're onboard?

 

I'm on the gang plank but looking over my shoulder at the shore

 

*push* *snickers*

 

Wheel spacers are round. Similar in shape to these:

 

Captain FJ...sorry for the inconvenience but I need to get off the list.

 

That's Mr. Captain FJ to you. And I hate you just a little





;-)

 

What do you expect from a 3rd gen owner. Par for the course.

 

LOL! Damn I just wanted my first mods on my stock 3rd Gen to be spacers but I decided I don't need them...

 

I hate to admit it but its probably a good decision.

 

Yeah I just wanted more poke but decided I'm happy with it for now. Might just get more aggressive offset wheels...

 

I'm getting 1.25 for more pokey pokey

 

I hope they work ok on my setup

 

Anyone with a 3rd gen on here, I read and I'm trying to confirm that 3rd gen Tacoma wheel offsets are different front and back. Or its the axles..

What sizes are you all getting for your 3rd Gen.

 

I'm getting 1.25 but I'm running 18x12 with 35x12.5 on my 3rd gen

 

I have stock wheels / tires, looking at 1.5" up front & 1.25" in the rear. I believe this is how @MilkTeacoma runs his.

Just afraid my fronts will poke out further than the rear.