Reloading Info and B.S. Thread

Mmmmmmm those look hot! What did you use?

 

@3378jakesr5 what was the weight of the 9mm bullets?

What powder is good for the 9mm and 38?

 

115gr and any powder that is good for a 9mm parabelum and 38spl will work

You need to get a book. Ill sell you my nosler book if you want

 

I have a book just no pic of it and I'm gonna try to get a bottle and primers from Montana

 

Winchester Brass (Got a good deal on them from Midway)
CCI Large Pistol Primer
Hi-Skor 700X powder (4.5grn)
230grn RN coated lipstick topper

 

Anyone here load 6.5x47 Lapua?

 

Honestly I use the hodgdonreloading.com database as well. If you're using Hodgdon or IMR powder they have a really good look at what loads are out there with most common bullet weights by caliber

 

Started some load development tonight..

Barnes 300gr TTSX



Vs 208gr 300blk.

 

now there are 2 reloading threads?

 

This is our secrete reloading hide out. Colorado edition

 

this one like all the ones riley and josh are in turn to a bs page real fast so we made this one to keep others sane

 

What's that? ME? BS? I know nothing. On a side note @YamaDirtrider what powder are you using for 9mm? Since I acquired my new toy I need to mock up some rounds to try out

 

I am planing on using a#5 since it will also work with the 38/357

 

Let's compare post count... better yet who had over 100 comments on Facebook last night.

 

Ahh. Gotcha. Let me know how it turns out. Have to recoup funds before I can go on a reloading bender again

not that it compares to what Jake's doing but I like to think having a girlfriend at home balances it out somewhat...

 

In that case been trying to find one of these for 6 weeks. Any ideas (I have subscribe to all the notify me when available stuff too)


http://www.noveske.com/products/kx5-flash-suppressor-w-crush-washer

 

Youdo not necessarily need that brand for that. Its literally just a solid can to direct it forward. Get a cheaper one and it does the same thing.are you planning on your rail going over the length of your barrel?

 

Working on that so we will see if i down grade to your capacity reloading. But she sounds like she likes shooting too so who knows it might go up!

 

Bananas do not equal apples

 

But the Noveske one looks cooler....Also are you specifically looking for the KX5? because to Jake's point the KX3 is in stock and if you're not trying to hide it under the handguard just go that route instead