7" rear drop OEM crossmember with bridge (95.5-04)

I can now offer these OEM bolt in crossmembers with a bridge already in them and shipped to your door. Trucks at 6" in back don't need them, but trucks at 7" and more do. The rear drive shaft flange hits the crossmember when the diff rotates upward under acceleration or when carrying something in the bed.

Standard cabs and extra cabs require this bridged rear gas tank crossmember. The hole for the gas tank strap has been re drilled 1" to the left, and the original hole cut out. All tabs and exhaust hangers are where they should be. There is a core charge. Model shown is for a 2004. These are bolted and welded into a jig when customized to prevent any unwanted movement. PM for details.



Before

 

you DEF. need to start making some for the 2nd gens Beefy!!! lovin your work though.

 

Thanks bro. There's definitely a bunch of stuff I need to get the 2nd gens. I'm hoping this year will be a good one for the 05+. I have one coming my way soon.

 

there's been a bunch of stuff happening wrong with Toyota in general for the 05's hopefully they have all the kinks worked out, I'm getting tired of hearing "hey did you know your..." "you know your..."

can't wait to see what you have in store.

 

i need to move to california lol

 

do yo ugot some pics of some trucks with this ?

 

Here are a few pics. This part is for going beyond 6" in back of a 95.5-04 five lug. 6" drop only requires a c-notch, but 7" requires this mod and also the bed brace trimmed like in this pic.



sold as a weld in, or complete cross member with core charge pictured in first post



These trucks have it...

 

My sons rear crossmember like the one above rotted out. I got a replacement from Toyota. Are you guys having any luck getting them back in without modifying it?