What Have You Done To Your 3rd Gen Today?

Trying to finish up my BDS lift install, but wasting time taking pretty pictures

 

^^^^^^^
You can find it for $364.99

 

TRD Grill
TRD Wheels
BFG's 265/70/17
Leer 180 with sliding Windoors
no lift
TRD CAI
Flowmaster American Thunder

 

The empty fuse socket under the dash above the driver kick panel is hot 24/7. It is what I used for my dash cam. You just need to be sure the add-a-fuse is plugged in the right direction. The wire on the add-a-fuse must point towards the kick panel, not towards the inside.

 

Happy for you. Use to drive a 2006 and now a 2017. Definitely a great feeling! Congrats!

 

My second post here on TacomaWorld.

I made an organizer for my console. I left a little room at the front of the top tray for the charge plug.

 

I customized my off screen.

 

Honestly I have noticed no change from stock other than the feeling of being a bit taller

 

Fucked
Over
Rebuilt
Dodge

 

Not to rain on your parade. But why can't people take videos on their phones correctly. Turn it sideways and you get a lot more in frame.

 

Measure from center of wheel to fender then it does not matter what tires are on it.

 

Been a while since I've been on here but I have done a few things

Finally got a trd pro grill

Trd center caps

Ceramic tint

Katzkin leather finally installed

 

I can't remember - the lift was in the garage waiting for the truck for 4 months at least. seems like $1300 or something like that? I added LR UCA's and a 1" rear block (just in case bed was low - is not installed and probably won't need it) as well as the added option of having the front coils/shocks pre-assembled. whatever it was it was worth it - the truck handles exceptionally well.

 

Looks great! I would REALLY like to do the wheel/tire combo you did - curious what that ran $? also, I'm not too interested in a lift at this point, so want to double check that you dont' have any rubbing issues? Also, are those BFG's the K2O's or whatever everyone talks about on here?

 

Yeah I get that but that isn't how he took his measurements. Would still not be comparing apples to apples.

 

Post a build log for this please! I'm considering doing something similar

 

Agreed. I already gave my buddy a hard time for it haha

 

Solid! I can't tell from the picture, but how did you mount the extinguisher?

 

I used this T-slot nut below to attach the extinguisher holder to the cab bed rail. Secured with a 3/8-16 X 1-1/4 inch Button Socket cap Screw.

Then just mount the extinguisher in the holder it came with.

$18 Te-Co 41406T Black Oxide 1018 Steel Tapped Through T-Slot Nut, 3/8"-16 TPI, 5/8" Height x 7/8" Width x 9/16" Table Slot (Pack of 5)

https://www.amazon.com/dp/B009SWGLHW








You can opt for a double strap holder for more firm mount as I did.




https://www.amazon.com/gp/product/B00F5CKIN2/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1


Also recommend an extinguisher with a metal head.




https://www.amazon.com/Amerex-2-5lb...rd_wg=tJ8jQ&psc=1&refRID=74ANNAS7NBYZ4D4ADB2R


Did put my name on it hoping some low life does not take it.

 

Love the wheels!