Which Bed Box

I just brought home my '17 long bed & I'm looking at a CWS low profile bed box. Any suggestions on which model will fit best?

 

http://www.tractorsupply.com/tsc/pr...y-poly-utility-storage-box-44-in?cm_vc=-10005

the above link is what i put on my LB. I installed the front rail. Then with some all-thread, t-slot nuts, and washers I made 3 mounts. it sits below the track system and there's about 6in. on each side between the bed and the box. It's held up great to Idaho snow and the sun hasn't beaten it up any.

Hope this helps.

 

post pictures please

 

i will later today when i get off work

 

I like this one. You can add nice locks and lock it in the bed. Its deep sticks up a little high though. I have a bed bar behind it so it does not hit the bed when it opens. Its heavy duty.

http://www.tractorsupply.com/tsc/ca...rBy:&pageView:&minPrice:&maxPrice:&pageSize:&

 

I have this one

 

i have a TonneauMate, low profile composite, lockable, suspended, and fits under a tonneau.

http://www.truxedo.com/p-36241-tonneaumate.html

i never installed it since getting a mountable expedition bag under my tonneau. i have the box in my garage never even installed, brand new. if you want to make an offer, go ahead. but I'm not sure it's exactly what you're looking for..

 

Can

Can you confirm it fits a Tacoma bed? The link you posted shows it only fits full size and for Toyota only lists the Tacoma. Can you take a picture of it in the bed?

Also which mountable expedition bag did you get instead?

 

i confirmed the fitment from autoanything.com when i bought it. it was for the tacoma, obviously. i'm not sure if they don't carry it any longer, or a manufacturer o/s, but i can't say why they only have a tundra/full size fitment now. i haven't installed it, but i can place it in the bed maybe tomorrow if i get a few minutes to get a pic.

i got a Truxedo Expedition bag (http://www.truxedo.com/i-25817214-truxedo-expedition.html) because i have an Extang Encore tonneau that folds from the cab side and can access everything in it easy. this is a great combo i think, but the brackets are universal and don't fit, so i need to modify them.

 

is it possible to get a part number on your tonneaumate, and maybe some measurements (LxWxH) ? Their video says it fits full size trucks, and we obviously don't have those..

if this fits in our trucks, and is the right size I might get this instead of building my own.

 

end to end measuring the lid, the widest part, it's 54"

 

Will it fit in between the wheel wells or will it only fit near the tailgate?

 

got mine from Lowes, I needed a quick "trunk" until i figured out what I'm going to do permanently. It's turning out to be a really good box. it was bout 150.00.

 

in accordance to this picture (just so we're talking about the same dimensions), Im assuming you're saying it's 54" in length. how wide is it? I need to know because I'll be tight on space. Im planning on getting an ARB fridge and that will take up 33" of the bed, plus a pace edwards switchblade canister is 10" so I have a little over a foot left in the bed

 

This thread may have other ideas for you.
https://www.tacomaworld.com/threads/bed-storage-container-ideas.408944/

I installed a protech that is holding up well.

 

using your pic as a guide:
L 54"
W 22.5"
H 14.5"

 

that's some nice bed bling looks awesome

 

Any idea if a factor tonneau cover would wit over this?

 

it's designed to fit behind the cab, suspended mounted so you can slide boards or whatever under it. has brackets and mounts to the rails.

 

Not sure. I don't have a tonneau cover, but the box dose sit below the bed rails by about an inch or so.