Installing fog lamps on 2nd gen. 4cyl. Wiring?

I want to install a set of PIAA fog lights, the ones that have the halo ring, in the stock holes on my 05 taco. There is no bracket behind the plastic fillers in the stock holes. Any ideas? Also, there are two wires with connectors on the end that don't look to be running anything, but they are connected to the battery and stop towards the front of the bumper. The connectors have a "1" on the top of them. I already have the fog lights, but they were cut off my friends 4Runner, and he only left about 5 inches of wire on them. Will I be able to use them still?

 

yes, as long as they reach your battery connections. if not just strip back the insulation and solder a longer wire piece in there (of the same gauge)

as for the connector im not sure what it is