Blanco Taco Build. LS, 4.0 Kings, caged, backhalfed, Trophy Truck

Sub uh dub dub

 

getting shipped out here soon

 

Your mom's dildo?

 

big black baby maker

 

Once you get your lower links check and see if the rear cab mount is in the way. I might have to modify mine.

 

Got these funky things today

 

mine is 12" from rod end center to coilover mount then 4.5" shock mount to mount. from what i see i dont think the cab mount will hit. i was worried about the front bed mount on the frame might hit the coilover. ill take another look here in a minute

 

just went out to see, kind of a pain to hold them up lol from what i see they clear just fine then the axle would probably hit the bottom of the frame. hard to tell ill try to set it up better this weekend and send you pics or a video

 

Yeah this is my issue. At bump I'm worried the link might hit this. I was just curious if you would of had the same issue. I can't raise it higher because my slider bar is in the way.

 

might be a dumb idea but if you drop down the link mount on the frame just down below the frame but still to the outside, youll gain more clearance and a little more uptravel before it hits the mount?

 

like so, he was hitting his rear cage frame tie in for the cage, but i plan to run it like this so i can get more level so its not at such an angle. idk how your rear sliders are but id imagine its the same thing of what mac ran into

 

I see what your saying. I'm worried about dropping my link to far below the frame rail. It would take beating from rocks if I'm in the mountains. But if I do drop it lower it will help my anti squat numbers. I just might have to do that. Thanks for the pic, it helps.

 

i wanna get some pics from JTA for his frame link mounts and see. id like to have mine lower just like in the picture but outside the frame rail. let me know what you come up with. post lots of pics lol

 

Will do bud

 

thanks to silver ghost i gotta spend more money.
http://www.automotiveinteriors.com/...ith+Lid+Covers&color=57&state=NEW+JERSEY#year

 

Erryone going vinyl! I'll let you guys know how mine goes when I finally get it installed.

 

I got it from him VVVV But I really need the vinyl because my truck is a work truck and I wear boots all the time in my truck. My carpet is shit now from my boots.

 

Even with weather techs? Or do you not have them? They are awesome I highly recommend.

 

Havent done anything to this turd for a while, but next on the list is rear mounted tranny coolers, gonna sink my first spare down level with the rear one, then 2 atomic darele coolers will go on top of that, with a quick release fire extinguisher in the middle and then to finish it off im gonna get a custom 36" chase light made. also gonna build a jack skit for a HF aluminum jack and mount that on the pass. side of the bed and then a 40mm ammo can on the driver side. i have enough space between my tires that im thinking of 2 5 gal race jugs with trays thatll lock just for shits and grins. as of now links are kinda just gonna collect dust for a while, really dont feel like dropping 3k on shocks right meow and have the truck down so gonna do other stuff ive wanted in the meantime.

pics of the coolers ill get, with some black fittings and blue hose.


heres the chase light, replacing the white in the middle with either blue or green, right side amber will flash.


dont really have pics for the other stuff but you get the idea. ill post as i buy it.

any other ideas?