What have you done to your Tacoma today? 1st Gen Edition

Yes they are. Jack the truck up. take ALL of the lugs off. Then try again.

 

Tried to get to the cabin, made it farther than I though I would.

Than went and explored a little.

 

Sounds correct. The old lug nuts remaining are not allowing the wheel to rotate ever so slightly as needed to allow the shank of the nuts to move past the washer seat on the wheel.

 

Went to change the rack and pinion bushings today to my surprise first of the bushings came out quite easy
then as i pull the second one out i noticed familiar number etched on the bushing Dang it! that's when i realize the truck already has ES bushings installed
I immediately inspect the lower control arm in hopes that it has them in as well but no luck looks like the only place where previous owner put in ES was the steering rack



It was missing the washer though so i didn't feel like it was completely worthless to do it
installed couple other things while the truck was on the ramps

 

I had my TG bolt on sliders welded on for $50. Used self etching primer & rattle canned matte black paint so I can touch them up anytime. Wasn't interested in drilling 32 holes in my frame either! This weekends project!

 

Looks good. I would have them weld the bolt holes closed so that water doesn't sit in there. Assuming you ground all the paint off the frame where the feet are, that seems like a recipe for rust.

 

Which kit(s) did you go with? This is on my short list of to dos.

 

Nice looking , yours is limited edition correct?... i may ask later details on mods when wallet grown up after 22....i did the lineX bedspray and is worth it. Now. Bedtime for me ....later TW zzz

 

Did you get the 27mm sway bar bushing?

 

Notice you have the Bluetooth 0b2 reader....what screen you using... I have tried to make some work but it still doesn't read many of the gauges...

 

Almost finished...

 

I've been considering doing this. How long did it take to replace all this?

 

Got the kit from Amazon was around 40-50 bucks cheaper then ES website plus free shipping
Includes basicly everything that is available for this truck

$233 Energy Suspension 8.18107R Hyperflex Master Set for Toyota 4WD

https://www.amazon.com/gp/aw/d/B004ALMEUE/ref=yo_ii_img?ie=UTF8&psc=1

 

What size tire is that?

 

Yes 27mm bushings
Came in the full kit

 

Any idea how ES compares with Whiteline? I've heard that Whiteline is better, but haven't seen it discussed much. And I don't know about pricing differences. Never looked into it.

 

I been doing the big stuff one day at a time
Still need leaf springs done and control arms

Saved those for the last haha

 

That sucks. When I called ES and ordered directly they sent me the 26mm sway bar bushings. Obviously too tight.

 

Have not heard of white line yet so cant answer that
Just been using ES for all my cars
And been happy

 

Sweet. Thanks. Added to my spreadsheet