Pelfreybilt Off-Road

Thanks

 

How do these Relentless tabs mount? There isn't any instructions on their website. Do you have to drill for them?

 

@Pelfreybilt

Never heard back about size/thread pitch of the locking nut you use to keep a 05-11 rear swingout now instead of the castle nut and cotter pin. I would appreciate the information as I would like it to be easier when taking off the swingout.

Matt

 

What's the tube diameter for the center hoop option?

 

No. The front goes over the existing outer two bumper mounting studs, the rear goes through one of the holes with a plastic plug in it. Remove the plug, then run the bolt through and put the nut on the other side. If you have Icon's with remote resi's, you'll need to drill a hole through the resi mount, as it covers the existing hole in the frame.

 

Thanks! I do have the Icon remote reservoirs so I'll be doing some drilling.

 

Sorry, didnt realize you did not get an answer before. the thread is 1"-12.

 

@Socalduckslayer

 

The steel versions are 1.75" and the Aluminum is 1.50"

 

Cool, that is exactly what I was wondering...I've seen both material bumpers in person and could have sworn they were different diameters.

 

anyone with a 2nd Gen taco and the TACOMA STANDARD REAR BUMPER with pics to post up? I got rear ended and am looking at this bumper. a red taco would be even cooler

 

I'm sure there is, but there are also two incredible inventions called the search button, and google images

 

I need some sliders for my 2016 double cab long bed. I'm just about to pull the trigger on the Pelfreybilt 90" bolt on sliders. Before I do, is there a coupon for anything I can apply before checkout to save myself a few dollars?

 

Doubt it. They don't do a TW discount. But they have sales every now and then. Best to email Satin directly and ask.

 

Installed today by @Speed Freek

 

Question for those of you with swingouts. Just got everything installed yesterday. I notice I have to lift up on the gate a little bit to latch it otherwise it will drag on the bumper slightly. Everything in the spindle is seated and torqued. I do have a 33 spare and two gas cans on it. Just wondering if this is normal. Thanks!

 

I wonder if they would make a set of skids without their logo, since i wont get a discount i prefer not to advertise for free

 

You're joking right? What makes you entitled to a discount over the other 4,000 members on here?

 

Mine does not sag and I don't have to lift up to latch it. I have the same things on the swing out.

 

Who says im entitled.. if you always pay full price i feel sorry for you.