What Have You Done To Your 2nd Gen Tacoma Today?

Front drive shaft at the tcase...

 

www.supercrewsounds.com Cheers! $180 shipped.

 

Just installed my redline tuning hood strut elites

 

Finally got my Mobtown sliders in and installed! Couldn't be happier with them the wait was worth it.

 

Pics suck but installed hid headlights with led fog lights from ddm

 

Retrofit or stock housing?

 

so this happened today
before 8 hours later and 1 coat of primer

 

Took longer than it should have but she's on now. Been sitting in the garage for months but now she got her facelift.

 

Stock housing but i do have aftermarket headlights

 

What a process... got it done but not before cutting out both rear shocks, the 1st center pin stripped without even putting pressure on it. Had to go to the hardware store and find a similar bolt (grade 8 not the cheap ones they gave me) ground down the head made it fit. Front strut tower had a siezed bolt that stripped. Had a special ratchet head to get out stripped bolts. The last one the nut on the tie rod stripped so back to the store I went to buy a new tie rod end just for a bolt... oh and my Hi Lift kicked out twice hitting the tailgate both times so that has deep gouges and dents... but it's all on now after 7.5hrs of working on it..

 

Not sure why it posted like that sorry ha

 

@mattgecko
https://www.tacomaworld.com/threads/fs-waterproof-under-bed-rail-led-lights.253004/

 

What type of weather/conditions has your truck been in?

 

central cali heat that's about it. it just all of a sudden showed up over a 2 month period or so

 

I had the best truck day ever! I finnished the skid pan, installed new SPC UCA's, and instaled 1/2 inch spacer up front! It satarted at 6am at work to Finnish the welding on the pan, ended with a drink in my hand and my woman in a good mood!

 

Sandpaper on a small da
80 grit
120 grit
320 grit
400 grit
600 grit
mothers metal polish

It almost looks like chrome now

 

Thanks for the info. The application I was thinking was for lower on the frame to see clearance and or oncoming objects while wheeling. What puzzled me was the interface for the multiple inputs, but I see how that works now. Very cool use of multiple camera. Thanks!

 

How does it sound? I was considering this route before I bought a 10".

 

Go with a 10