1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Noise from clutch linkage on manual 6 speed 4WD 2014

Discussion in '2nd Gen. Tacomas (2005-2015)' started by pinestrawman, Apr 5, 2017.

  1. Apr 5, 2017 at 11:28 AM
    #1
    pinestrawman

    pinestrawman [OP] New Member

    Joined:
    Apr 5, 2017
    Member:
    #215415
    Messages:
    2
    Gender:
    Male
    My clutch linkage makes a grinding or squeaking noise on the way up or down. Clutch works fine, problem can be felt in your foot as you go up or down. Dealer says there is a bulletin but not a recall--they want to replace whole pedal and linkage assembly (about $750). Doesn't seem right at 60,000 miles. Any thoughts?
     
  2. Apr 5, 2017 at 8:22 PM
    #2
    Norton

    Norton Senior Member

    Joined:
    Mar 10, 2011
    Member:
    #52729
    Messages:
    4,660
    Gender:
    Male
    First Name:
    Steve
    Colorado Springs, CO
    Vehicle:
    2013 Access Cab 4x4 V6 6MT, TRD OR & Tow Packages
    Magnuson S/C w/12TRDTacoma's Qwikchange Hub & 2.5" RIP-Modded Pulley, Roostfactor's Pulley Wrap Mod; FPR Mod; JustDSM Tune via HPT MPVI2; mightytacoman Intercooler Tank; aFe POWER Magnum FLOW Pro DRY S Air Filter; OME Suspension Lift (885 Coils, Dakar Leafs, NitroCharger Sports); TRD Quickshifter w/TRD 6-Spd Knob; TRD Exhaust; NSB-AGM27F Battery w/HKB Adjustable Voltage Booster & Coupe's TRD Battery Hold Down; Goodridge SS Brake Lines; Trident904's MT ADM; BFG All-Terrain T/A KO2s on FJ SE Anthracite Rims; N-Fab 6-Step Nerf Bars; BPF TRD Skid, Tow Hook, & Cooling Panel; jsi's Locker Anytime, Up2NoGood's 2Lo Module; ramonortiz55's Always on Power Outlet Relay, ND4's Fog Light Anytime, & Crom's Speed Bleeder Mods; crashnburn80's Ultimate Headlight & Fog Light Upgrades; ThreatLevelMidnight's Wireless Charger; 4Runner 4X4 & FJ Fog Light Switches; redtaco2007-inspired LED License Plate Lights; AudioControl LC2i LOC, JL Audio XD200/2v2 Amp, Focal PS165V1 Spkrs, Sound Ordnance B-8PTD Sub, Hushmat & Noico Sound Insulation; loginfailed-inspired Speedhut Boost & AFR Gauges in a Lotek Pillar Pod; Ltd Auto-Dim/Compass/Temp/Backup Camera/Homelink mirror on ImMrYo's Mirror Lift Bracket; TacomaBeast Glove Box & Console Organizers; Husky Floor Liners; UltraGauge EM; mesojdm's Ultimate LED Dome & Map Lights & GASSHOLE; Redline Tuning QuickLIFT Elite; Mobtown Offroad Locking Bed Storage Doors; Toyota Bed Mat; Cali Raised Led Bed Stiffeners; Pop & Lock Power Tailgate Lock w/TacomaTruckParts Support Bracket; ARE Z-Series Cap, SolarGard Tint; BlendMounted & MirrorTapped Uniden R3; CravenSpeed Stubby Antenna; Amsoil Lubricants; Adam's Detailing Supplies
    IMO, no, it doesn't seem right. Unfortunately, this is a well-worn topic... Search is your friend.
     
  3. Apr 5, 2017 at 8:59 PM
    #3
    azzwethinkweiz

    azzwethinkweiz Well-Known Member

    Joined:
    Sep 6, 2016
    Member:
    #196623
    Messages:
    974
    Tucson, AZ
    Vehicle:
    2013 4x4 DCSB V6 6-Spd, TRD OR, Tow Package
    Takes about 30 minutes to an hour to take it apart and grease the pivot assembly yourself. The pivot gets dry and that usually causes the noises. I'd say there is probably no need to replace any parts... just re-grease.

    Mine was having the same issues when I bought it around 30k miles. Grease fixed it right up, still good 17k later.
     

Products Discussed in

To Top