RC 6" lift coil spacer/shock question

If you use the RC spacer. you don't need to disassemble the Coil Over, just unbolt the 3 upper studs, and the lower bolt, and then attach it to the spacer.

The whole Coil Over is removed as one.

 

I wish I had seen your build before I cut my crossmember or I would have done something similar with the notch.

I'm very close to pulling the tigger on these.

I crammed 315/70R17 KOs under mine and they are just short of 35" but I had to do the cab mount chop. I have zero rubbing.

My truck is nice and smooth with this lift, I've had zero problems with it. I'm working on getting the BDS Fox Coilovers but I'd be interested in seeing what Toytec comes back with on the Icons.

 

Yeah that BDS kit is nice. I could've gotten a good deal on it installed for around $3500 from a BDS dealer- that's install, kit and labor. Just didn't want to put that much into it but it looks like I'll probably be doing close to that much if I spring for these icons. I'll add a crappy pic of my crossmember mutilation in a bit. Lol

 

Which Icon's are you looking at?

 

These are the icons

 

The carnage