Tacoma Headlight Give Away!

2014 TRD Off-Road Prerunner




Suspension:
OME 886 coils
OME nitrocharger shocks
Dakar leafs
Wheelers Superbumps

Armor:
Demello 3 hoop front bumper
@Shmellmopwho sliders

Miscellaneous:
Goodyear Wrangler Duratracs 265/75/16
SCS Ray 10s
Prinsu Cabrac
Bestop Suptertop
Custom Bedrack
@CaliRaisedLed Ditch light pods

 

Westin bull bar with KC slim lights, custom dual exhausts, 3" lift, 285/70r17 cooper discoverer stt pros, 2 10" kicker subs and kicker sound system!

First pic is of me and my bud doing some long range shooting, and the rest are some aesthetic pics I took that same day

 

What filter is that last pic in

 

Oh my god. I want to use my dual action polisher on that so freaking bad.

 

I know I don't stand a chance against most if these guys so far but what the hell!

Wheels & tires
17x9 -12 offset Fuel Kranks wrapped in Cooper Discoverer STT's 35x12.5

Suspension/lift-
Front-
Maxtrac spindles & extended brake lines
Bilstein 5100's set at 0 with OME 885's
SPC/Light Racing uca's

Rear-
All Pro expedition leaf springs
All Pro extended brake lines
2" blocks
Extended length Bilstein 5100's.

Interior-
5% window tint
Kenwood Navi Radio
Weathertech mats
Wet Okole seat covers
Interior LED's along with some added above the cup holders, in rear cup holders, inconsole & in glove box.
CB in console

Exterior-
@Mobtown Offroad locking bed storage doors
Bullet Proof Fabricating (@Matt123) skid plate & tow hook
Amp Research power steps
Grillcraft grill with aluminum TEQ badge
Ditch lights with @ragofabrication brackets
Light bar in lower grill opening
Truxedo tonneau cover
LED bed lights
Bed mat
Redline Tuning hood struts
Black Depo tail lights
Custom made CB antenna mount
Debadged




And just to show she does go off road, mainly for hunting but sometimes on the trails even though it's been a little while. Haha




My Vote Is For @Acerwin

 

Maybe second place?

 

2014 Regular Cab 4x4 Auto

Icon 2.5 ET COs
Icon Progressive AAL
LR UCAs
Level 8 MK6 wheels
285/75-16 Fierce Attitude MTs
4.88 Diff Gears
Detroit TruTrac (Rear)
LCE Header
AFE Dry Filter
TRD PRO Grille w/ Custom Painted Letters
OEM Fog Lights
Shorty Antenna
Custom Red Outline Badge Decals (Cboy808)
Depo Black Tailights
Custom Wet Okole Seat Covers
Red Interior Trim Paint
Weathertechs
Tint
UWS Low Profile

 

I'll be looking at votes only, people tagging won't get counted I will only look for votes.

 

I will try and make a daily count, this is blowing up and would make it easier on me later lol

 

I vote for @SpruceTaco

 

I vote for Mike @SpruceTaco

 

Thanks for the vote buddy

 

Thanks guys!

 

I'm in. I was planning on doing the BLHM, but I'll hold off for this sweet offer.

Interior mods:

custom startup screen
paracord seat handles
kydex flashlight mount
anytime fog light
center console grid-it
K&N drop in filters
LED center console light
LED map lights
LED dome lights
LED cup holder lights
LED door pocket lights
LED hood light
LED glove compartment lights
shifter paint
100w/400w anytime
redline struts
door lock chime muted
steering wheel trim paint
head unit trim paint
dash trim paint
shifter painted
Cooling panel/tray
heated mirrors
Husky floor liners
Husky mud flaps
weapon mount
sound deadening
rear seat MOLLE panel
dual battery setup
Blue Sea 100A Fuse
Blue Sea 12 slot fuse panel
Blue Sea ML-ACR
Battery monitor
AR15 bolt engraved radio switches
Yeti cup holder mod

Exterior mods:

tail gate anti-theft mod
plasti-dipped badges and emblems
corner gussets
custom fishing rod holders
LED 3rd brake light
LED bed lights
LED reverse lights
differential breather
flag stickers
fire extinguisher mount
LED underbody lights



MOLLE panel mod that I designed


For future electrical mods, I made this switch panel. Now to fill it with switches.

 

Here's my 2013 Limited DCSB 4X4 typical Taco. I have a lot of plans for this baby; namely long travel rear, FSA, full skid plates, and a high-clearance rear bumper.

My mods are:

Brute Force Fab front bumper "Hybrid" style

4XInnovations rock sliders

Custom built bed rack

Tepui Autana RTT

Smittybilt Awning

Hidden upper grille 32" Arsenal light bar

Hi-Lift jack with ORB

Bottle opener mod:


I was actually just looking at you all's lights and was thinking about how sweet they would look on my truck all built up! I plan on completing my mods over the next 2 or 3 years and keeping this truck forever!

 

My Rig is just getting started but its come along way in the past few months. These lights would be killer on the front end now and in the future when the front end gets overhauled. Lots more to do.

Check out and follow my build!

Snapped this over the weekend after performing 2010+ 4Runner Brake Swap for Low Range Off-Road as a Guinea Pig and adding OME 29XL extra leaf. Will be writing a a thread on the swap shortly after I perform some more brake tests.



Day I brought her home:



A few recent photos out in the wild:




Truck:
2013 Tacoma DCSB TRD Off-road
4.0 V6 MGM
4x4 AT

Installed items:
Engine:
Stock
Fumoto F-103N Engine Oil Drain Valve

Suspension:
King 2.5 front Extended with 650lb springs with Adj and 2.5 rear shocks with Adj
Total Chaos UCA
OME Dakar 2.75 Rear Leaf Pack
OME 29XL Extra Leaf
OME DriveShaft Spacers
LROR U-Bolt Flip Kit with Sumo Bumps
LROR Diff Drop Kit
SCS Ray10 17"
BF Goodrich KO2 285/70/17
2010+ 4Runner Front BBK - Guinea pig test first for @Low Range Off-Road Slotted Rotors
Steel Braided Lines, ATE OG200 Fluid

Interior:
Toyota All-Weather Mats
Toyota Tacoma Glove Box Organizer
Vehicle OCD™ (Organized Console Device) Toyota Tacoma Center Console
Vios Replacement Knobs
Rearview anytime Mod - switch, add a fuse, wire, etc..
Cheap Amazon Tablet windo mount
iPad mini 3 w/ LeadNav and lifetime CaliMaps overlay.
Blackout interior - (Shifter Bezel, AC/Radio Surround)
Helix 4x4 switch/Ring - [Not lighting up but does work when tested]
BaoFeng UV-5R Dual Band Two Way Radio (Black) - Thanks @goblue82
14'-15' Steering wheel controls [Waiting on some connectors for it to light up]

Exterior:
B.A.M.F. 80" Sliders w/ Kickout, Filler plates and DOM upgrade
B.A.M.F. 2nd Gen CB Mount
OEM Bed Mat - Thanks @TRlPPlN
B.A.M.F. CMC Plates
Leer Shell w/ Rack Sliders
Derped Badges
Thule Rack
Yakima Box Top - left over from my Audi Wagon build.
LROR - E-Locker Guard
@Bentrodder Bed Supports
Connor Towing 1615190- NEW 5/8" Receiver Lock for Class III, IV, V Black Nickel
Color Matched OEM Grill - Dupli-Color Rattle Job
Overland Bound Member #4088 Medallions (both sides)
RokkBlokz oversized F/R
HomerTaco Satoshi w/ M1 style mesh powder coated black - Thanks @markm0311

Lighting:
@CaliRaisedLed 18W Pods, Ditch Mounts & Harness

Misc:
DYI Co2 air setup (Gentec 227C-150 Flow Regulator for Light Duty Applications, random Husky connectors, Hose (Flexzilla), Tank (20lb), C02 tank)
ARB air Chuck
ARB Deflator
4 Gallon RotoPax Gasoline
2 Gallon x2 RotoPax Water
Rotopax DLX Pack Mount x2
Rotopax Self-Venting Spout
Rotopax Extension x2
Rotopax - Tacoma bed mounts

Recovery:
ARB ARB705 2-3/8" x 30' Recovery Strap - 17500lbs
TRED 1100 Recovery Tracks, Mounts and Straps
Smittybilt Receiver Hitch D Ring 3/4'
Recovery Tool Mounts (QuickFists/DYI)
Bully Tools 92510 12-gauge Round Point Shovel With Fiberglass D-gripHandle
Bully Tools 93520 Fiberglass Single Bit Axe with Hand-Finished Blade
Hi-Lift 60" Extreme Lift
Hi-Lift recovery winch kit
SHMELL FAB PRODUCTS (@Shmellmopwho) Hi-Lift Mounts

Need to install:
B.A.M.F. Mid Skid
B.A.M.F. IFS Skid
B.A.M.F. Raptor Letters
Ellis Precision Shift Knob
Redline 2005-2015 Toyota Tacoma Hood QuickLIFT ELITE
MOLLE panel For behind the back seat

Planned Items: - (When time/$$ permits)
B.A.M.F. Trans Skid
B.A.M.F. Rear Diff Skid
FJ Double Cab Rear Sunvisors Mod
Katzkin seats
Warn Winch (TBD on which one) when front bumper happens
Tailgate Lock
New Sound System
Exhaust Re-route
Rear seat USB charger port
Projector Retro Fit HID Headlights and Foglights (Come on voters!!!)
Other Various Utility Gear and Storage Stuff (TBD)
Pelfreybilt 2005-2015 TACOMA STANDARD REAR BUMPER WITH GATE
Pelfreybilt 2012-2015 TACOMA STEEL FRONT PLATE BUMPER w/ center hoop

$625 ARB CKMTA24 Twin Air Compressor Kit On-Board 24V Incl. Fully Assem Air Comp Complete Wiring Loom Comp Isolating Switch Splash Resistant Air Filters Mounting Bolts/Washers Twin Air Compressor Kit

ARB CKMTA24 Twin Air Compressor Kit (going with a C02 setup but maybe for backup)
Prinsu Cab Rac Powdercoated Black
Prinsu Top Rac 5' bed
LED light Bar if/when Prinsu rack happens
ARB ARB207D Bow/Clevis D Shackle
ARB Products 10100020 Snatch Block
SCS Ray 10 17 x 8.5 Spare
Nitro Gears F/R 4.88

 

maybe we can PM you our vote or make a survey monkey or something.

 

@SpruceTaco

 

damn that looks great. seems like the install of the brake lines went well.

 

Sure did!