Turn Signal \ Marker light and Theater \ Courtesy Mud lights Controller

I've designed and built a controller for using a single light as a turn signal and marker light.
Also incorporated a time delayed and dimming rate for theater, mud, exit lights or interior lights.
3 versions available:
1. Turn signal and theater lights $80.00+ shipping
2. Turn signals only $45.00 + shipping
3. Theater lights 45.00 + shipping
https://youtu.be/zX2SKxW2naY

 

hmmmmm interested in seeing how they wire up, specifically interested in the turn signal on/turn signal version

 

I have the 1st gens in detail. Right down to were to connect on the integration relay. 2nd Gen I just need to study a wiring diagram for an evening to figure out.

 

The turn signal lights are not included. There's many different ways to do it. From stick on lights to drilling small holes in a pattern and pushing LED's thru. I used these lights myself.
https://www.tacomaworld.com/threads...heater-courtesy-mud-lights-controller.489775/ post #3
There is similar lights on ebay for $10.

 

Will work for LED flush mount or cube lights as turn signal and marker light.

 

Bump for bling

 

bump

 

bump

 

bump

 

To confirm, this is a replacement relay that controls the OEM side mirror LED lights - thus making them marker lights in addition to their OEM function as turn signals?

 

Yes or for lights like I have added to my first gen. It can be used for the OEM lights but wiring may be a little more involved. A new wire may have to be run to the OEM light.