Wiring for bed light at third brake light and bed light switch

i have a cap on my truck and the light front m the third brake light does not illuminate anything. I do not want to add any more switches to the dash. Can I disconnect the bed lights and run a line from the cabin switch to the inside of my cap? Thanx.

 

yup, i've done it using one of @mattgecko bed light kits, and ran it to the new panel replacing the empty space (actually using 2 of his kits, one with the switch in the bed and the second kit is wired to the switch in the cab)
https://www.shapeways.com/product/CHMNWZF8H/tacoma-narrow-switch-plate-for-16-tacoma

 

Thanx. I wanted to use the factory cargo light switch. And just tap off the correct wires for the third brake light cargo lights after removing those leds and placing a new one in the cab.

 

It can be done but you will need to pull it apart and figure that out. Wish I could help but I added switches, here's the link to the LED bed kits. best option if you have a camper or bed cover (tons of photos to support)
https://www.tacomaworld.com/threads...d-lights-3rd-gen.391380/page-23#post-14323634

 

I tied my LED bed lights into the cargo light switch by splicing into the green wire described here:



https://www.tacomaworld.com/attachments/00016-34089-led-bed-lights-pdf.1231344/

 

thanx, exactly what i needed.