2" Lift Coils. Headstong vs OME

http://www.headstrongoffroad.com/store/p449/HS_2"_Lift_Coil_-_HS-TT05503-2LC.html

So I'm about to piece together my suspension (currently running 5100s @ .85) and was curious if anyone was running these. I'm looking for a 2" lift coil and was wondering how they compare to ome 884s? Pics if you have them please. Any feedback is greatly appreciated.

The setup I'm going for is 2" coil + 5100 up front and progressive 3 leaf aal w 5100 rear. Trying to keep it simple and cost effective. King or Icon would be nice but I don't need them for my daily. Plus I have another expensive 2 wheeled habit.

Thanks in advance.

 

Beuller.

 

Just get OME 884s, they will give you 2"

I am running 884s and they are great so far, have a Deavers single AAL in the rear.

 

I'll probably just go the ome route. Did you add a diff drop or no?
Truck looks great btw and is basically the height I'm trying to achieve.

 

There's some good info in here about the diff drop.

https://www.tacomaworld.com/threads/who-has-done-the-diff-drop.489774/

 

At 2" you shouldn't need a drop but any higher and I'd recommend it. You may or may not need to replace the bearing after if it starts going out on you, you will know immediately if you do.

https://www.tacomaworld.com/threads...differential-bearing-vibration-thread.152173/

 

No dif drop here.