1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Wiring Century/Leer Cap

Discussion in 'Tonneau Covers, Caps and Shells' started by LocoLocal, May 19, 2017.

  1. May 19, 2017 at 8:15 AM
    #1
    LocoLocal

    LocoLocal [OP] Aspiring Polymath

    Joined:
    Jul 5, 2013
    Member:
    #107668
    Messages:
    5,210
    Gender:
    Male
    39.081221472127545, -77.45538862919935
    Vehicle:
    Large American
    Has anyone ever wired up one of these using a TAG fuse box (I think that is the brand name, but I will get pictures later)? It's got what looks like a 6 pin input, and then 2 outputs - one for the brake light, and one for the dome light and lock/unlock.

    I know I could wire my brake light and dome light directly to the sources, but would prefer to keep it how this cap is currently wired as it is done very nicely.

    I will post better pictures when I have the chance. This is under writing that says "chassis input." I am assuming that I need a harness that wires to this input.

    IMG_2321.jpg

    I guess my real question is if anyone recognizes this input or knows which (model # or name) harness it takes. My next step is to take it to a cap dealer, but would rather get answers here from the folks at TW.
     

Products Discussed in

To Top