1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Please delete

Discussion in 'Lighting' started by Thyces, May 22, 2017.

  1. May 22, 2017 at 11:37 AM
    #1
    Thyces

    Thyces [OP] 2 seater taco

    Joined:
    Nov 19, 2015
    Member:
    #170146
    Messages:
    3,210
    Gender:
    Male
    Ontario
    Vehicle:
    2009 DCLB TRD Sport
    Custom painted 6112's Fox 2.0 12" in the rear Allpro expedition leafs (garbage) Pelfreybilt aluminum single hoop front Full size pickup bedslide modded to fit Satoshi grill Ubolt flip kit Archive garage shackle flip 5" Sumo supersprings 1500lbs SPC uca's Full set RCI skid plates Weld on sliders ABS killswitch Pop'n'lock power tailgate lock Falken Wildpeak mt on FJ rims Plastidipped emblems Ebay projector headlights Smoked aftermarket tail lights High output led reverse lights Hella horns 330w 5d led bumper bar 18w spots on track facing rear (fuck you lights) B&m trans cooler Bussmann fuse box ECGS bushing Big 4 (0 gauge ofc wire) upgrade Mechman 240 amp alternator Jl 10w7 in a 1 1/2" thick wall custom box Alpine 1000w rms mono amp Group 31 AGM battery installed next to sub Yaesu 2800 Bearcat 980 in dash with wireless mic and stainless whip Diff breather mod Hilux snorkel Turbine pre filter Baja Rack low profile cab rack Rifle case on rack Shovel and axe on quick fists in bed Flat and spade shovel mounted in bed Highlift mount in bed Tech deck with magnetic ram mount Tab s7 on ram mount
    I bought these off Amazon.
    https://www.amazon.com/gp/product/B01HHQK4ZA/ref=oh_aui_detailpage_o06_s01?ie=UTF8&psc=1
    https://www.amazon.com/gp/product/B01N5EAHWQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
    I am in the process of installing these lights to my bussmann. I believe I've connected everything correctly but am not getting them to turn on. Led on the rocker switches comes on. I looked into the specs of the lights and they state "operating range 10-30v" the relays state 40vdc. Would this be the issue? What else could cause them not to work? Any info/advice would be appreciated.
     
  2. May 23, 2017 at 7:26 PM
    #2
    paranoid56

    paranoid56 Well-Known Member

    Joined:
    Jul 25, 2012
    Member:
    #83443
    Messages:
    3,379
    Gender:
    Male
    San Diego
    Vehicle:
    14 double cab taco
    do you hear or feel the relay click when you turn on the switch? is this just a normal bussmann relay setup?
     
  3. May 23, 2017 at 7:53 PM
    #3
    Thyces

    Thyces [OP] 2 seater taco

    Joined:
    Nov 19, 2015
    Member:
    #170146
    Messages:
    3,210
    Gender:
    Male
    Ontario
    Vehicle:
    2009 DCLB TRD Sport
    Custom painted 6112's Fox 2.0 12" in the rear Allpro expedition leafs (garbage) Pelfreybilt aluminum single hoop front Full size pickup bedslide modded to fit Satoshi grill Ubolt flip kit Archive garage shackle flip 5" Sumo supersprings 1500lbs SPC uca's Full set RCI skid plates Weld on sliders ABS killswitch Pop'n'lock power tailgate lock Falken Wildpeak mt on FJ rims Plastidipped emblems Ebay projector headlights Smoked aftermarket tail lights High output led reverse lights Hella horns 330w 5d led bumper bar 18w spots on track facing rear (fuck you lights) B&m trans cooler Bussmann fuse box ECGS bushing Big 4 (0 gauge ofc wire) upgrade Mechman 240 amp alternator Jl 10w7 in a 1 1/2" thick wall custom box Alpine 1000w rms mono amp Group 31 AGM battery installed next to sub Yaesu 2800 Bearcat 980 in dash with wireless mic and stainless whip Diff breather mod Hilux snorkel Turbine pre filter Baja Rack low profile cab rack Rifle case on rack Shovel and axe on quick fists in bed Flat and spade shovel mounted in bed Highlift mount in bed Tech deck with magnetic ram mount Tab s7 on ram mount
    No, it turns out I'm an idiot. I didn't install the actual fuses that are connected to the relays. Thanks for the response though.
     
    RacecarGuy likes this.

Products Discussed in

To Top