Stock seat height request

Hi all

I scored a pair of 95 4runner seats for 25 bucks off craigslist yesterday. They are in pretty good shape. Not a direct bolt on but first initial placement look shows it shouldn't be much work to tweak them to fit, some minor bending and a little welding (brackets are shorter). Though about doing a write up on how too do it.

However I removed my stock seats a while ago. The 4runner seats look like they will sit more slanted backwards than the stock seats. I would like to match the height of the stock seats in at the back mounting points. If someone would be so kind to measure from the floor board to the bottom of the bracket next to the rear mounting bolts I would be very appreciative. Thanks for the help in advance.

 

Is this what you were looking for? About 2 3/8" from where it drops down right in front of the mounting location, and right around 2" from the raised up part.

 

Thanks NIGHT TACO, that was exactly what I was looking for. The help is much appreciated.

 

No problem, glad to help