What Have You Done To Your 2nd Gen Tacoma Today?

You look BUG ready!

 

The hitch for the draw bar is hidden behind the license plate.

 

Installed some rails for cargo/tie downs inside the softopper.

 

Finally secured a workable panel to mount my Bussman relay/fuse box and Circuit Breaker. A big mega-thanks to parnoid56. My truck has a bigger master cylinder assembly than a lot of other Tacos (why, I'm not sure) and his regular panels were too big to fit. But after two tries we finally came up with a nice tight little panel that fits.

 

Remember the bolt size for mounting the panel to the truck?

Im heading to the hardware store after work today..........

 

They are standard M8 1.25-pitch bolts. About 3/4-inch long should be sufficient.

 

Thank you! Looks good!

 

Wired up my fog lamps

 

I like the rails what are they?

 

Aluminum T slot framing. Use it a lot for light duty machine bases, guarding, etc... Available from Mcmaster-Carr.

https://www.mcmaster.com/#t-slotted-framing/=17s347b

 

I think you can get it a lot cheaper from https://8020.net/

 

Thanks man that stuff is bad ass

 

Not sure if you can buy direct from 8020. We always had to go thru a distributor.

 

Check out the ebay garage sale
http://stores.ebay.com/8020-Inc-Garage-Sale

 

Waved goodbye to it on my way to work today good news is i get to take it on a 8 hour road trip to see family and camp this weekend!

 

They might have changed.

I've been trying to build a roof rack from this for a while. The only problem is the corners. No one makes a nice corner bracket that would look good.

 

Yup

Sure is

I ordered direct from 80/20. Very easy.

These are the 1020 bars.

 

Cut a piece of aluminum and attach to the open end.

 

$52 8020, 1020, 10 Series 1" x 2" T-Slotted Aluminum Extrusion DIY Extruded Linear Slot Bar Rail 80/20 (Black Anodize, 60" Long)

I got mine on Amazon