BDS 4" lift

I just got the basic kit, bought the 5100's and using the stock coils. I might install the ome 883's later on and set the 5100's back at 0. On the rear springs I went with the stds over the expos only because wasn't sure of how stiff the expos would be. Then I just added a small block and couldn't be happier with the ride. You could always just go w the expos but I have heard mix reviews on the stiffness.

 

So in the rear you aren't using the 3" block that came with the BDS kit?

 

No replaced the leaf pack with the all pros and running a 1.5 block. Sold the 3" block that came w the kit along with the rear shocks it came with. Running bilstein 5100's front and rear and went and got the extended brakelines front and rear as well.

 

I got the fox shocks for the rear with mine and my bilsteins are on the way for the front. I have noticed that my stock leafs are a little flat so I wonder if the all pro leafs and the smaller block might be a better option. You don't have any pics do you? Its hard to find a picture of what a 4" lift would actually look like because most of what people have are either 3 or 6" lifts.

 

In my gallery and on my build page

 

I have been lookin at bds 4" lift! 6 is to much but was wanting to know if i could clear 35's on the bds 4" with 18x9 wheels? I offroad during duck and deer season

 

Sure you can with some cutting.

 

Are you able to run the trd skid plate with the dB? I see that most pics just have the black plate nothing more..