What Have You Done To Your 2nd Gen Tacoma Today?

Added AVS In Channels.

 

Welcome aboard! First post I see. Put up some pics of your rig. Wild and wonderful WV! Love it down there. Have family in Teays Valley.

 

lol I tried using plyers to unscrew it/pull it off and no luck so I cut it. It turned out ok, almost tempted to get another antenna that's new so I can pull it off and do it that way for a cleaner final product

 

I might have to do this, the auto store shorty antennas keep rusting their adapter thread things

 

Applied 303 Sunscreen To The Falkens, And Chemical Guys Wheel Guard to The Wheels.

 

I had to remove the paint and trim back the wire to get it to go back on. But it looks factory after a shot of black paint.

 

The "shorty" antennas from like cravenspeed that are 5" long suck, don't ever waste your money on em if you use your radio, just FYI. They look cool and that's all they do, zero reception in town or out of town. And ya the parts store shortys with adapters are cheap and rust. @ChadsPride found a 12" that looks like our factory ones on Amazon and he has no complaints from what I know, it looks good.

 

That turned out awesome!!

 

I only took off 7 inches and lost no reception. Thinking about going a little shorter to level with the roof line but not sure if i would be pressing my luck with reception.

 

I removed 10" but the ball is not making perfect contact with the antenna since I used epoxy to adhere it back (don't know if that affects it or not). I just popped it back on the truck today and I can give an update tomorrow after my morning commute. But chad stayed with his 12" he doesn't have an issue with reception so I think you might be ok

 

Well i had gotten a wee 12 inch metal 1 at the auto store that dodnt rist, but it sure as shit whistled lol

 

Thanks again @JdevTac for the info on the 3m adhesive, it's similar to what came from the factory that covered the predrilled roof holes but more industrial strength

 

Nice. And dude, where have you been?

Lift mate can be used from multiple spots.

This. Non sanctioned.

 

I see some sort of T-Slot nut, you have an Amazon link? I live in Canada and I am having the hardest time trying to find these T-slot nuts to fit my bed rails.

 

After installing my @HeadStrong Off-Road lift, my antenna was striking the top of the garage door frame every time I parked. I removed the mast, found a small stainless steel machine screw to fill the hole, and bought one of these instead: http://www.tunetrapper.com/index.html I also needed a Metra antenna adapter. Shoved the whole thing up underneath the dash (plenty of other mounting options with more patience/interest/enthusiasm). Whole project took less than 30 minutes.

Truth be told I'm not much of a radio listener so I can't offer comparisons of old versus new, but I'm picking up stations and HD signals without issue.

 

http://www.homedepot.com/p/1-2-in-Channel-Spring-Nuts-5-Pack-ZA1001-2EG-10/100193135

1018 Steel T-Slot Nut, Black Oxide Finish, Grade 5, Tapped Through, 3/8"-16 Threads, 5/8" Height, 9/16" Slot Depth, Made in US (Pack of 5)

$23 Te-Co 41406T Black Oxide 1018 Steel Tapped Through T-Slot Nut, 3/8"-16 TPI, 5/8" Height x 7/8" Width x 9/16" Table Slot (Pack of 5)

https://www.amazon.com/dp/B009SWGLHW/ref=cm_sw_r_cp_apa_4relzb9WJQS1G

 

Replaced front wheel bearing assembly and rotated the tires.

Call it persuasion. Lol



I thought that the noise was from my tires, but then it got progressively louder.
Thanks Bill, AKA BamaToy1997 @ Marionbumper2bumper for the quick shipping and great product.

 

I've got a bunch extra if you want me to check what shipping would be tomorrow
I bought a big box being overzealous and will only use a handful

 

2010 seems pretty new for bearings. How many miles?