1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

3rz prerunner code 0171 1130 1135

Discussion in '1st Gen. Tacomas (1995-2004)' started by westly7, Jun 6, 2017.

  1. Jun 6, 2017 at 5:43 AM
    #1
    westly7

    westly7 [OP] Well-Known Member

    Joined:
    Dec 16, 2015
    Member:
    #172418
    Messages:
    194
    Gender:
    Male
    First Name:
    Westley
    Vehicle:
    01 tacoma 2.7 auto 2wd
    02 pre runner 4cyl auto 300k miles
    got code 0171 1130 1135
    Happened about 8 month ago and i changed the bank 1 sensor 1 oxigen sensor,clean the maf sensor and reset the light,after few minutes light comes back and on and never bother with it till today the gas mileage decreasing like crazy and i can smell unburn gas on exhaust

    Is there any chance that maf sensor faulty?I dont want to throw another $200 for sensor and light still comes back on and didnt fix the problem
    Any help would be appreciated thank you
     
  2. Jun 6, 2017 at 9:55 AM
    #2
    Glamisman

    Glamisman Well-Known Member

    Joined:
    Oct 22, 2016
    Member:
    #200436
    Messages:
    4,985
    Gender:
    Male
    is there + 12v on the White/Red wire on the AF Ratio sensor? The ECU is "sensative" to the heater portion of the AF ratio sensor. If the ECU does not sense the resisitance change in the heater circuit due to it warming up, it trips this code.

    The Wrecking yard might be an option for a "test" part.

    Is this a Toyota AF sensor?

    There could actually be false air entering the motor after the MAF casuing the lean condition.

    Unfortunatly you are just going to have to check all vacuum lines, hoses etc until either you find the problem or eliminate that as a problem.
     
  3. Jun 6, 2017 at 10:43 AM
    #3
    westly7

    westly7 [OP] Well-Known Member

    Joined:
    Dec 16, 2015
    Member:
    #172418
    Messages:
    194
    Gender:
    Male
    First Name:
    Westley
    Vehicle:
    01 tacoma 2.7 auto 2wd
    Just did alot of research and turn out the whole time my brake booster is leaking air and most likely thats the one that cause those codes,just found this out now and pretty common on tacoma.
     
  4. Jun 6, 2017 at 11:22 AM
    #4
    eon_blue

    eon_blue If I would, could you

    Joined:
    Mar 4, 2016
    Member:
    #180213
    Messages:
    69,898
    Gender:
    Male
    First Name:
    Ryan
    Azusa, CA
    Vehicle:
    '04 TRD 3.4l 4x4 5sp manual Xtraca & '96 4runner 4x4 5spd manual

    Was gonna say, P0171 is usually traced back to a vacuum leak (it was for me)...in combo with those other codes it sounds like you've found the cause
     
  5. Jun 9, 2017 at 4:55 PM
    #5
    westly7

    westly7 [OP] Well-Known Member

    Joined:
    Dec 16, 2015
    Member:
    #172418
    Messages:
    194
    Gender:
    Male
    First Name:
    Westley
    Vehicle:
    01 tacoma 2.7 auto 2wd
    Does anybody knows the part number for a/f sensor bank 1 sensor 1 for 01 pre runner 2.7 auto?
    Install brake booster and code p0171 and 1135 gone but 1130 still there
     

Products Discussed in

To Top