What Have You Done To Your 2nd Gen Tacoma Today?

Next video posted going over the basics of the Ram Mount! Thanks to @Shmellmopwho for the image for this vid's outro!

https://www.youtube.com/watch?v=QwmxBYjjnpc

 

@Cory07TRD How do you like the Waterport? Does it rattle when you are driving and is the spout on top or side?

 

Hit all 7's today on the odometer.

 

Got home, ripped open the packaging and put on my NFab steps!

Before:

After:


I'm content for today. I can only imagine what I'll buy tomorrow though...

 

If only you were going 77mph!

 

Got some OME 886's on Nitrocharger 9000's for the front, and Bilstein 5160's for the rear.

 

Damn...i wish I would have thought of that.

 

I made a bracket to mount a fire extinguisher in the cab, and ordered some sliders from Allpro

 

Quick Question.

With a 3" suspension lift, will 33"tires on 15"wheels fit without having to trim any body mounts?

 

You're not going to fit 15" wheels on these.

 

Picked up 2 USMC Jerry Cans from 1974 on craigslist today for $40. Used 80 grit sanding block and a wire brush on the rusty spots and spray painted them.
The guy also gave me a poker set, table, and extension cord. Really nice guy, moving to Florida in 2 weeks.

Before:


After:


For now they are strapped (very securely) to my bed rail. I put cardboard under them to see if they leak.


edit: let me know if this is a fire hazard. I'm not sure if its ok to keep gas in a bed that has a cap. I've been keeping the sliding window open just in case there are fumes.

 

what about the BFG 33x10.5R15?

 

Nope. 15" wheels won't clear the calipers.

 

so if i want 33s im still going to have to trim the mount front body mount thing that everyone says?

 

NO. 15" wheels won't fit. Neither will 1"-14" wheels. You need a 16" wheel or larger for these trucks.

Fitting the tires is a whole different story.

 

LOL I was going to say something but you covered it

 

Just doing my civic duty

 

i understand. ill just use my stock wheels. just asking if trimming the mount is necessary for the 33s to fit

 

Washed and waxed

 

Depends. There are a LOT of factors that go into it I.e. Wheel specs, tire specs, lift specs. More than likely you'll need to do a cab mount chop (cmc) so be prepared for that before you buy 33s.