Tacoshin 2014 taco build

well this is my build so far

AFE stage 2 CAI 1543 miles,
Stock intake back on 23991 miles,

Smittybilt step bars, Toyota skid plate,

All Pro bed rack w/ tonno pro retrofitted thanks to pushingcasket for helping,

trd exhaust 14019 miles

Installed OME lift kit 886x with icon 3 leaf aal without overload, and arb bumper. 15443 miles. debating on putting back my overload.
Before measurements
Front: 20 center cap to fender
Back: 21
After measurementschool
Front: 23 1/4
Back: 23

15050 miles install my overload

16300 installed 885 springs measurement: 2.5 front both side 3 in rear both side


20735 miles installed 265/75/16 Hankook dynapro atm


20780 miles installed the ecgs bushing and no more humming and vibe.

 

bro lean =(

 

How have you liked the icon 3 leaf and the all pro rack? Also how has the OME w/ 886 been is it stiff?

 

the aal is great but I have the overload on it so it is a little stiff, OME 886 is very stiff I swapped it out with 885 so now has the rake which I like, all pro rack is awesome, i bought it from another TW member so i got it for a steal.

 

Nice man, yeah I got the Wheelers 3 leaf w/o over load and it is nice but has settled a bit. Still good for what I need now. I want to get Dakars and add a topper but still looking on Craigslist trying to find one for a steal. I went with 885x but might upgrade when I get a bumper or upgrade to fox or icons later. I really like those racks but want a topper for now.

 

get the all pro rack and have it cab size as in same height as the cab and get a soft topper, I seen some peepz on TW that has it done look pretty cool cause since it has a rack and its high enough that you can pull down the topper. I was gonna go that route as well but my rack isn't tall enough its only up to the rubber trim so soft topper was a no go but I found another guy here that did the rack and put a tonneau cover on so I retrofitted it to work for me

 

I have a rack similar with a custom canvas soft topper from EDDIE209 but my rack isn't welded together just bolted. It works for now but I need to replace the marine grade plastic windows as they have cracked in the colder weather and are a few years old. I just think the security of the hard shell would better suit me and my gear. But I have been throwing the idea of the allpro rack and SOS concepts racks around.

 

tits, that's awesome

 

how are the dynapros?

 

Love them and got it for cheap at wallyworld 116 a tire which wasn't bad for p rated

 

Yeah, Thats one of the reasons I like them. come in a good size and p rated!

 

nicesuh. I wanted to go falken atw 3 but it was a lil bit more on price. so I picked up the hankooks since I am Korean hahahahaahahahaa, but I had hankooks on my 03 elantra gt and loved them and wanted to see if ATM were good for trucks since its different than car tires and so far love them, very quiet and smoot.

 

Subbed! Nice looking build so far! How you liking the ride with the 886s and your ARB bumper? also curious if youre running a winch with that setup?

 

arb bumper is great, I switched the 886 to 885 cause it raise my ride up front 3.5 inchs and had the bro lean, I have no winch yet. wasn't really planning on one, but if I did a winch I would probably switch back to 886, the 885 coils hold up well up front with bumper 2.75 inch up front after settling, and I got the icon 3 leaf aal which raise the back end nice and I like the rake instead of level

 

I added couple more pics up top so you can kind of see the rake and what not