LCA mounts/gussetting

Hey guys,
I only have a mid travel kit but Im looking for some pictures, mounts, ideas for gusseting or replacing my lower control arm mounts. I figured Id have a little better chance of seeing something in this forum.

I recently was in an accident and bent my lower mounts and busted my stock lower arm. Truck was totaled out and I bought it back and got my tabs bent back in place pretty well but would like strengthen them a bit. Im thinking maybe some box tube cut in a pie shape to the frame or some plate out a few inches?

 

No help on this? I'm in same boat, hoping you got it figured out

 

Total Chaos makes a cam tab gusset that goes over this area. And also reinforces the alignment cams.

http://www.chaosfab.com/2005-2015-Tacoma-Lower-Control-Arm-Cam-Tab-Gussets-59860

 

hi, thanks for the input. I think i'm far beyond cam tab gussets tho, lol. the whole frame piece that the cam tabs go on are bent

 

If you bend heat them up and bend them back into place, and put the gusset over them it will be a lot stronger than stock.

 

For sure. Have you ever seen any other kind of strengthening or gusseting done in that area?

 

Do you have heimed upper control arms?

 

Nope. JBA with Moog ball joints

 

You could do something like this:

 

Interesting, good find. Thanks!

 

You're welcome. Here's the 2nd gen he built and sold to someone on here (that has since sold it):

https://www.tacomaworld.com/threads/martymcflys-build-reg-cab-long-travel.169719/

He's also on here: @Happysmiley