2013 Pro Comp 6" Stage 1 lift questions

What up new friends,

Hope you're all doing well when reading this post. So as I had mentioned in my first post in the new members post, got a lift on this truck. Just recently found out what lift it was, due to the descriptions in the lift builds available from Pro Comp. Found out it was a stage 1 kit due to the utilization of the stock coil overs being used with spacers. So while I was down in Colorado, (I'm a Chrysler mechanic), found out I had 4wp literally right down the road from me. Decided to purchase some monotube pro comp shocks to replace the shot ones on the rig. Found some disturbing things as I was getting ready to install the front struts. The OEM on the fronts shows signs of the sway bar end links have been making contact with the strut tower. Didn't want to install the new struts because I don't want that to happen to them. Plus the fact that I don't understand how the links are connected to the knuckles. Is there a cap on the upper mounts to remove them? Or are they incorporated to the knuckles themselves? I'll post pics of my rig later. Any help would be greatful.

 

You need to stick an Allen key in the end if the bolt that attaches it to the knuckle (don't know what size) and use a box end wrench to loosen/remove the nut.