1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Anyone running the PL30001 in their 4.0? OEM Roof Rack question Dobinsons IMS Struts and Shocks - Adjustable Height Monotubes - 2nd/3rd Gen Tacomas Skid plate install - using the wrong size tap (fixing it with Heli-coil?) Which OME Dakar Leaf Springs? (running the king coilovers and shocks) Backup camera

Step bar repair?

Discussion in '2nd Gen. Tacomas (2005-2015)' started by Geoff.in.nc, Jul 13, 2017.

Page 1 of 2
  1. Jul 13, 2017 at 3:28 PM
    #1
    Geoff.in.nc

    #1
    Geoff.in.nc [OP] Hey y'all, watch this!

    Joined:
    Mar 14, 2017
    Member:
    #213335
    Messages:
    118
    Gender:
    Male
    First Name:
    Geoff
    Fayetteville NC
    Vehicle:
    '23 Silver DCLB Sport (my 3rd Taco!)
    The dreaded previous owner of my truck evidently was rough on the steps. They're the chrome tube bars with black plastic inserts... not sure of the brand. Anyway the drivers side front insert is coming off and I guess the mounting bits broke because the back end won't stay in/on the chrome tube. And the front holds it loosely so that the black insert piece can rotate relative to the chrome tube.

    What would be a good glue to glue it back on?
     
    Geoff.in.nc, Jul 13, 2017
    #1
    smw62891 and TXpro4X4 like this.
  2. Jul 13, 2017 at 3:30 PM
    #2
    TXpro4X4

    #2
    TXpro4X4 Fuck Cancer!

    Joined:
    Oct 29, 2011
    Member:
    #66093
    Messages:
    29,015
    Gender:
    Male
    First Name:
    Bryan
    Costa Mesa, CA
    Vehicle:
    2011 TOY
    Toy Stuff..... Faktor Amber lights on in the grill. Under front bumper led rock lighting. Center counsel c.b mod with under the hood p.a. Anytime foglight mod. R.G.B tape light for inside toekick lighting. Front and back. Front weathertech floor mats. De-Baged except TOY on tailgate. FJ style 6 speed shifter knob. Rubber tacoma bed mat. Trd exhaust. Trd 16in beadlocker style wheels. Electrical a/c 115volt plug/usb mod next to passenger knee. Fox 2.5 coilovers. Icon 2.0's in the rear. Rear locker any-time mod. Abs kill switch mod. All Pro ISF front skid Pelfrey built front differential skid Baja design pro pods Rigid pods CBI pods brackets Mobtown tailgate guard RIP Mobtown Caliraised rear amber pod lights CJ Jumper- map, running, amber fog, reverse, and license plate led bulbs Pedal Commander
    Goop!
    The all purpose 1
    Use clamps!

    Pic would help to
     
    TXpro4X4, Jul 13, 2017
    #2
  3. Jul 13, 2017 at 3:33 PM
    #3
    smw62891

    #3
    smw62891 Well-Known Member

    Joined:
    May 2, 2017
    Member:
    #218006
    Messages:
    705
    Gender:
    Male
    First Name:
    Stephen
    Santa Fe, NM
    Vehicle:
    09 Tacoma DCSB

    Time to upgrade to sliders!
     
    smw62891, Jul 13, 2017
    #3
    TXpro4X4 likes this.
  4. Jul 13, 2017 at 3:33 PM
    #4
    TXpro4X4

    #4
    TXpro4X4 Fuck Cancer!

    Joined:
    Oct 29, 2011
    Member:
    #66093
    Messages:
    29,015
    Gender:
    Male
    First Name:
    Bryan
    Costa Mesa, CA
    Vehicle:
    2011 TOY
    Toy Stuff..... Faktor Amber lights on in the grill. Under front bumper led rock lighting. Center counsel c.b mod with under the hood p.a. Anytime foglight mod. R.G.B tape light for inside toekick lighting. Front and back. Front weathertech floor mats. De-Baged except TOY on tailgate. FJ style 6 speed shifter knob. Rubber tacoma bed mat. Trd exhaust. Trd 16in beadlocker style wheels. Electrical a/c 115volt plug/usb mod next to passenger knee. Fox 2.5 coilovers. Icon 2.0's in the rear. Rear locker any-time mod. Abs kill switch mod. All Pro ISF front skid Pelfrey built front differential skid Baja design pro pods Rigid pods CBI pods brackets Mobtown tailgate guard RIP Mobtown Caliraised rear amber pod lights CJ Jumper- map, running, amber fog, reverse, and license plate led bulbs Pedal Commander
    Or this
     
    TXpro4X4, Jul 13, 2017
    #4
    smw62891[QUOTED] likes this.
  5. Jul 13, 2017 at 3:35 PM
    #5
    JJ Customs

    #5
    JJ Customs Supreme Leader!

    Joined:
    Feb 24, 2008
    Member:
    #4935
    Messages:
    5,753
    Gender:
    Male
    First Name:
    Jay
    NV
    Vehicle:
    Sierra Denali Ultimate, 6.2
    A few additions to make me feel cool.
    You might want to search craigslist for a new set.
     
    JJ Customs, Jul 13, 2017
    #5
  6. Jul 13, 2017 at 3:41 PM
    #6
    Geoff.in.nc

    #6
    Geoff.in.nc [OP] Hey y'all, watch this!

    Joined:
    Mar 14, 2017
    Member:
    #213335
    Messages:
    118
    Gender:
    Male
    First Name:
    Geoff
    Fayetteville NC
    Vehicle:
    '23 Silver DCLB Sport (my 3rd Taco!)
    IMG_0012.jpg Here's a pic with the insert rotated to show what I mean that it's partially connected. Sliders would be sweet, but not in the cards now. A craigslist set might be at some point, but I'd like to stabilize the insert until that time comes.
     
    Geoff.in.nc, Jul 13, 2017
    #6
    TXpro4X4 likes this.
  7. Jul 13, 2017 at 3:46 PM
    #7
    stickyTaco

    #7
    stickyTaco Fuck Cancer

    Joined:
    Dec 11, 2012
    Member:
    #92904
    Messages:
    5,923
    Gender:
    Male
    First Name:
    Zack
    Reno/Tahoe
    Vehicle:
    '12 DCSB TRD-OR
    Fox/Dakar with Relentless goodies and stuff
    Remove it, clean the chrome tube and the plastic step, and 'glue' it back on with a bead of marine silicone.
     
    stickyTaco, Jul 13, 2017
    #7
    LOLLY and TXpro4X4 like this.
  8. Jul 13, 2017 at 3:48 PM
    #8
    TXpro4X4

    #8
    TXpro4X4 Fuck Cancer!

    Joined:
    Oct 29, 2011
    Member:
    #66093
    Messages:
    29,015
    Gender:
    Male
    First Name:
    Bryan
    Costa Mesa, CA
    Vehicle:
    2011 TOY
    Toy Stuff..... Faktor Amber lights on in the grill. Under front bumper led rock lighting. Center counsel c.b mod with under the hood p.a. Anytime foglight mod. R.G.B tape light for inside toekick lighting. Front and back. Front weathertech floor mats. De-Baged except TOY on tailgate. FJ style 6 speed shifter knob. Rubber tacoma bed mat. Trd exhaust. Trd 16in beadlocker style wheels. Electrical a/c 115volt plug/usb mod next to passenger knee. Fox 2.5 coilovers. Icon 2.0's in the rear. Rear locker any-time mod. Abs kill switch mod. All Pro ISF front skid Pelfrey built front differential skid Baja design pro pods Rigid pods CBI pods brackets Mobtown tailgate guard RIP Mobtown Caliraised rear amber pod lights CJ Jumper- map, running, amber fog, reverse, and license plate led bulbs Pedal Commander
    A good glue
    Or rtv8 silicone will work fine.
    But make sure to use some sort of even clamping pressure for good bond. And clean and scuff up the metal under the rubber with a light sandpaper for good adhesion.
     
    TXpro4X4, Jul 13, 2017
    #8
    TRDSport10 and smw62891 like this.
  9. Jul 13, 2017 at 3:50 PM
    #9
    Geoff.in.nc

    #9
    Geoff.in.nc [OP] Hey y'all, watch this!

    Joined:
    Mar 14, 2017
    Member:
    #213335
    Messages:
    118
    Gender:
    Male
    First Name:
    Geoff
    Fayetteville NC
    Vehicle:
    '23 Silver DCLB Sport (my 3rd Taco!)
    I've got lots of those pistol grip clamps, so that should be very doable

    Is marine silicone available outside marine/boat shops? Never looked for it before.
     
    Geoff.in.nc, Jul 13, 2017
    #9
    TXpro4X4 likes this.
  10. Jul 13, 2017 at 3:54 PM
    #10
    Killowatt

    #10
    Killowatt Well-Known Member

    Joined:
    Jul 4, 2016
    Member:
    #191226
    Messages:
    803
    Gender:
    Male
    Citrus County Florida
    Vehicle:
    2013 4x4 TRD OFF ROAD
    If all of that fails, try gorilla glue, just clamp it good, as the stuff foams up and expands.
     
    Killowatt, Jul 13, 2017
    #10
  11. Jul 13, 2017 at 4:04 PM
    #11
    Clearwater Bill

    #11
    Clearwater Bill Never answer an anonymous letter

    Joined:
    Oct 11, 2014
    Member:
    #140097
    Messages:
    24,602
    Gender:
    Male
    First Name:
    Billy
    Largo Florida
    Vehicle:
    '13 5 lug AC w/convenience package
    A few OE parts from fancy trucks
    Drill where the mounts have broken.

    Mark the plastic and drill them in the same place.

    Use a nice panhead SS self tapping screw.

    No one will even notice, and they'll certainly stay in place.

    Or just go ahead and get some real sliders :D
     
    Clearwater Bill, Jul 13, 2017
    #11
    vssman and ChemDawg like this.
  12. Jul 13, 2017 at 4:04 PM
    #12
    stickyTaco

    #12
    stickyTaco Fuck Cancer

    Joined:
    Dec 11, 2012
    Member:
    #92904
    Messages:
    5,923
    Gender:
    Male
    First Name:
    Zack
    Reno/Tahoe
    Vehicle:
    '12 DCSB TRD-OR
    Fox/Dakar with Relentless goodies and stuff
    You should be able to find marine silicone at any auto parts store or Walmart...maybe even at a home improvement store.
     
    stickyTaco, Jul 13, 2017
    #12
    EPBlueTaco likes this.
  13. Jul 13, 2017 at 4:15 PM
    #13
    Muddinfun

    #13
    Muddinfun Well-Known Member

    Joined:
    Apr 17, 2017
    Member:
    #216500
    Messages:
    7,489
    Muddinfun, Jul 13, 2017
    #13
  14. Jul 13, 2017 at 4:23 PM
    #14
    TegoTaco

    #14
    TegoTaco Well-Known Member

    Joined:
    Sep 29, 2016
    Member:
    #198555
    Messages:
    7,231
    Gender:
    Male
    Ontario, Canada
    Vehicle:
    ‘13 SUPERCHARGED DCLB TRD SPORT
    Fix it, get rid of them and buy sliders. :D
     
    TegoTaco, Jul 13, 2017
    #14
  15. Jul 13, 2017 at 4:26 PM
    #15
    Taco-bender

    #15
    Taco-bender Well-Known Member

    Joined:
    Jun 21, 2017
    Member:
    #222099
    Messages:
    142
    Gender:
    Male
    Tucson AZ
    Vehicle:
    2010 Tundra 4x4
    Taco-bender, Jul 13, 2017
    #15
    Geoff.in.nc[OP] and ChemDawg like this.
  16. Jul 13, 2017 at 7:23 PM
    #16
    MRPVette

    #16
    MRPVette Well-Known Member

    Joined:
    May 21, 2017
    Member:
    #219582
    Messages:
    60
    Gender:
    Male
    First Name:
    Mike
    Kingwood Tx
    Vehicle:
    2011 tacoma TRD
    Tinted windows, alarm, leather interior, retraxx bed cover, 3" lift,17x8 moto medal rims,275/70/17 bfg tires
    Windshield urethane is good stuff buy a tube at any glass shop or get a couple of black self tapping screws.
     
    MRPVette, Jul 13, 2017
    #16
  17. Jul 13, 2017 at 7:28 PM
    #17
    Rome604

    #17
    Rome604 I am the Captain now

    Joined:
    Feb 23, 2017
    Member:
    #211478
    Messages:
    4,615
    Gender:
    Male
    First Name:
    Dave
    Alexandria, VA
    Vehicle:
    2023 TRD Pro Sequoia
    I'd use some double sided 3M tape. (You know, the stuff used for your truck badges). You can get a roll at any autoparts store. That step won't move again.
     
    Rome604, Jul 13, 2017
    #17
  18. Jul 14, 2017 at 9:04 AM
    #18
    Just Dandee

    #18
    Just Dandee Well-Known Member

    Joined:
    Mar 5, 2015
    Member:
    #150227
    Messages:
    607
    Gender:
    Male
    First Name:
    Dan
    Southwest Idaho
    Vehicle:
    2015 TRD OR
    Supercharged-2.5 lift-255/85/16
    Doing this and some adhesive and you will be golden for sure! True value will have some self tapping screws.
    Drill where the mounts have broken.

    Mark the plastic and drill them in the same place.

    Use a nice panhead SS self tapping screw.

    No one will even notice, and they'll certainly stay in place.

    Or just go ahead and get some real sliders :D[/QUOTE]
     
    Just Dandee, Jul 14, 2017
    #18
  19. Jul 15, 2017 at 5:28 PM
    #19
    TXpro4X4

    #19
    TXpro4X4 Fuck Cancer!

    Joined:
    Oct 29, 2011
    Member:
    #66093
    Messages:
    29,015
    Gender:
    Male
    First Name:
    Bryan
    Costa Mesa, CA
    Vehicle:
    2011 TOY
    Toy Stuff..... Faktor Amber lights on in the grill. Under front bumper led rock lighting. Center counsel c.b mod with under the hood p.a. Anytime foglight mod. R.G.B tape light for inside toekick lighting. Front and back. Front weathertech floor mats. De-Baged except TOY on tailgate. FJ style 6 speed shifter knob. Rubber tacoma bed mat. Trd exhaust. Trd 16in beadlocker style wheels. Electrical a/c 115volt plug/usb mod next to passenger knee. Fox 2.5 coilovers. Icon 2.0's in the rear. Rear locker any-time mod. Abs kill switch mod. All Pro ISF front skid Pelfrey built front differential skid Baja design pro pods Rigid pods CBI pods brackets Mobtown tailgate guard RIP Mobtown Caliraised rear amber pod lights CJ Jumper- map, running, amber fog, reverse, and license plate led bulbs Pedal Commander
    Did ya fix it?
     
    TXpro4X4, Jul 15, 2017
    #19
  20. Jul 15, 2017 at 6:28 PM
    #20
    Geoff.in.nc

    #20
    Geoff.in.nc [OP] Hey y'all, watch this!

    Joined:
    Mar 14, 2017
    Member:
    #213335
    Messages:
    118
    Gender:
    Male
    First Name:
    Geoff
    Fayetteville NC
    Vehicle:
    '23 Silver DCLB Sport (my 3rd Taco!)
    Geoff.in.nc, Jul 15, 2017
    #20
    TXpro4X4 likes this.
Page 1 of 2

Products Discussed in

3M Marine Adhesive Sealant 5200 (06504) Permanent Bonding and Sealing for Boats and RVs Above and Below the Waterline Waterproof Repair, Black, 10 fl oz Cartridge
$25.27
To Top