Back spacing ?

I have a 3 inch lift and i want to put 285/75/16 tires on it. but i've heard people saying that there tires are rubbing the UCA? Does this involve back spacing being too small?

 

4.5 backspacing and 0 offset should take care of you.

 

ok sounds good!

 

Now depending on the tire you chose I hear some still get a bit of rub. But new UCA's can stop that. If you experience it. Nice looking truck.

 

yea i just don't feel like spending $400 on uca's!

 

I don't blame you. I didn't get new UCA's because of rub, I wanted the extra flex and to relieve the stress on my stock ball joint after the lift. I have 285/70/17 called 33s but measure to 32.4"

 

You gonna run a 16x9 or 16x8? I have a 5.71" bs and +18mm offset and I don't rub

 

More options still available. Your in good hands. My rims are 17x9, for reference.

 

well my rims now are 16x8 and i reckon ill get my new tires before rims so ill get the same rim size on my new wheels

 

Stock 05+ is ~5.5 so I would stick with 4.5 or less. Remember...the smaller the BS # the more the wheel sticks out there for pushing it away from the UCA.

 

^^^Not all the 05-10 tacos wheels are 5.5bs. My stockers are 5.25bs. I think the majority of the guys on here that are running 33's have a 4.5" bs, that would be a zero mm offset on a 16x8

 

Does anyone know how much sideways flare coverage there is with a 33" tire?

What I want to know is, will the stock fender flares still cover the tire to meet local law requirements? What about with a 1" wheel spacer?

I have an 09 TRD offroad with stock rims. Does anyone know what the backspacing is on those rims?